Hi everyone. I am now using the lrp oxygen version 1.8.0 that can boot from a cd. I got it to boot on a pentium 3 machine and run into a few pbs. if anyone has had experience with it maybe these will sound familiar.
1) I only needed the cd to boot. it did work. However I made a boot disk prior to that. 1)Once Im at the root I am prompted to choose b/w some options to configure the router. I found out how I can change and move out of each file that is presented to me, but when trying to save it (back up) it comes with the following error end_request, I/O error dev 02:2c(floppy), sector 19 end_request, I/O error dev 02:2c(floppy), sector 20 At first I thought it was a bad floppy but when I tried some brand new disk the error persisted and nothing got copied. Does that sound like a common thing? Is it the disk? should I make a image file from the cd first? 2)inside the /etc/ folder the file network.conf presented me with some questions: should I set eth0 as local or as external? the entries for eth0 and eth1 both requires IP, netmask and gateways setup should they be the same or different? 3)I also saw two files that look kinda familiar to network.conf I am referring to networks.conf and gateways.conf. Do I need to configure those files too or should I rely only on the one first one (2)? 4)inside the module option I saw three network files: pci-scan tulip and eepro 100 since I am running 2 nics 3C905 I figured I need to get some drivers for those 2 cards and mount them. Does that sound right or I have enough tools there? thanks and regards. -M _________________________________________________________________ Join the world’s largest e-mail service with MSN Hotmail. http://www.hotmail.com _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user
