i mean when i tried to connect to that ip with an outside-the-firewall
connection none of the port forwards worked...
# ip addr list
...
2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 100
link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
inet 64.113.72.222/24 brd 64.113.72.255 scope global eth0
inet 64.113.72.219/24 scope global eth0
...
my portforwards in network.conf are
INTERN SERVERS="tcp_${EXTERN_IP}...... so since i use the variable extern_ip
i should be listening on both ip's (in theory) but when i svi network ipfilter
list portfw it only shows portforwards from the first ip, not to the second.
attempts to connect to the second ip, however, do not go through. i'm confused
because ip shows that it's listening on both ip's... is there something i'm
missing?
On Mon, 2002-03-04 at 09:05, Charles Steinkuehler wrote:
> > I tried adding a second static IP to my dachstein floppy 1.0.2 ... so i
> > go into /etc/network.conf and uncommented the line
> > eth0_IP_EXTRA_ADDRS="w.x.y.z" (where w.x.y.z is my new static ip)
> >
> > and reloaded (svi network reload)... no luck. so i went to the
> > instructions for configuring network.conf, which said there was an
> > option for eth0_ALIAS0, so i commented out the IP_EXTRA_ADDRS and added
> > eth0_ALIAS0=w.x.y.z
> >
> > reloaded, and also no luck... any ideas? thanks
>
> Um...what do you mean by "no luck"? How were you testing your new IP? What
> was the output of "ip addr list"? Did you open the firewall for desired new
> external services (including ICMP for pings) and port-forward appropriately?
>
> Charles Steinkuehler
> http://lrp.steinkuehler.net
> http://c0wz.steinkuehler.net (lrp.c0wz.com mirror)
>
_______________________________________________
Leaf-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
