Support Requests item #523277, was opened at 2002-02-26 22:08 You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=213751&aid=523277&group_id=13751
Category: Release/Branch: Dachstein Group: None Status: Open Resolution: None Priority: 5 Submitted By: Nobody/Anonymous (nobody) Assigned to: Mike Noyes (mhnoyes) Summary: IP Port Forwarding on Dachstein Initial Comment: I'm running the Dachstein LRP on a pentium 133 box with 3com and Network Anywhere network cards, and am connected to the internet via DSL. The router works great, but I am now trying to forward port 80 for www over to a Mandrake 8.1 box running Apache (don't be fooled, I'm a Linux newbie). I've determined so far that the ipmasqadm portfw command has to be used instead of the old ipportfw. I'm relatively certain that I've got the usage of that correct, and it seems to think that it is forwarding the appropriate ports and IPs (and I've tried every possible iteration of the command and IPs). I've also done some minor things like move the weblet to port 8000 so it isn't in the way. I've been at this on and off for a few weeks so I can't recall every last thing I've done, but I've looked through the documentation I could find and still don't have it working. Basically when you try to connect to the website from outside it acts like it is opening the page then suddenly jumps to a page not found message, which indicates it is not actually forwarding the port. I'm still not sure exactly how/where to include the port forwarding in the modules so that it does that on startup. If anybody has some advice or some documentation that I haven't found I would really appreciate it! ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2002-03-18 12:12 Message: Logged In: NO I put my Ipmasq portfw rules in the port forwarding section of the network.conf right under the INTERN_XXX_SERVERS section.... and remember to open the www tcp port just above in the EXTERN_TCP_PORTS="0/0_www" variable..... I hope this is right... Newbie also.. if not, hopefully someone will let us both know... Gary ---------------------------------------------------------------------- You can respond by visiting: http://sourceforge.net/tracker/?func=detail&atid=213751&aid=523277&group_id=13751 _______________________________________________ Leaf-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user
