I assume you just want to use the printer internally. Here is how I setup my
print-server (actually it has nothing to do with the LRP):
Connect it to the hub (e.g. 192.168.1.x), from another computer, open a
Command-Prompt box set the printer IP by typing (supply yours)
arp -s 192.168.1.207 00-60-b0-bb-d7-50
^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^
printer IP MAC address (found on the printer-server)
wait for a couple of seconds and you should be able to ping it. Now telnet
to it and set other things like Netmask, GW and so on. After that you can
run the adm software. Note that if you run XP, you do not need to run an adm
software. See HP Web site for more details.
Here is the listing when I telnet into my printer-server and type ? for
help:
Connected to hpIII (192.168.1.207).
Escape character is '^]'.
HP JetDirect
Please type "?" for HELP, or "/" for current settings
> ?
To Change/Configure Parameters Enter:
Parameter-name: value <Carriage Return>
Parameter-name Type of value
ip: IP-address in dotted notation
subnet-mask: address in dotted notation (enter 0 for default)
default-gw: address in dotted notation (enter 0 for default)
syslog-svr: address in dotted notation (enter 0 for default)
idle-timeout: seconds in integers
set-cmnty-name: alpha-numeric string (32 chars max)
host-name: alpha-numeric string (upper case only, 32 chars max)
dhcp-config: 0 to disable, 1 to enable
allow: <ip> [mask] (0 to clear, list to display, 10 max)
addrawport: <TCP port num> (<TCP port num> 3000-9000)
deleterawport: <TCP port num>
listrawport: (No parameter required)
addstring: <name> <contents>
contents - For non-printable characters use
\xx for two digit hex number
deletestring: <name>
liststring: (No parameter required)
addq: <name> [prepend] [append] [processing]
prepend - The prepend string name
append - The append string name
Use NULL for no string
processing - RAW, TEXT, or AUTO
deleteq: <name>
listq: (No parameter required)
defaultq: <name>
ipx/spx: 0 to disable, 1 to enable
dlc/llc: 0 to disable, 1 to enable
ethertalk: 0 to disable, 1 to enable
banner: 0 to disable, 1 to enable
Type passwd to change the password.
Type "?" for HELP, "/" for current settings or "quit" to save-and-exit.
Or type "exit" to exit without saving configuration parameter entries
--__--__--
Message: 3
From: "John and Sandy Arvidson" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Date: Tue, 16 Apr 2002 10:05:12 -0600
Subject: [Leaf-user] hp print server prob
Hi,
I have setup the lrp firewall and a couple of my machines using mostly
defaults in the network.conf file. I have tried several trial and error
methods to get our printer recognized in this setup. I have and HP laserjet
4mp with an external print server... JetDirect EX plus. This print server
(black box) needs to be configured using hp print server adm software from
one of the machines on the network. I cannot get either of our pcs to
locate the thing with ip address, hardware address or unspecified search.
The test button on the print server shows that it wants to be 192.0.0.200
with default gateway 192.0.0.194. Anyone have any suggestions?
Here is the output of the various files and commands. Thanks for any help
you may provide!
John
[EMAIL PROTECTED]
_______________________________________________
Leaf-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
