Comments inline
> Try to remove or uncomment the modules. Ok I' ll try that and see what happens. > > > Btw the new kernel was necessary to boot from flashmodule from apacer > which > > is an idedrive. > > > > At the end of /boot/etc/modules isofs.o is trying to load. I said > trying, > > because it is failing stating > > insmod: init_modules isofs.o device or resource busy > Did you use your own created modules, or did you download the > modules ( in that case you could have a problem due to the fact > that the modules on the bering site, are from a patched kernel. I used downloaded versions, but I used the same patches for the kernel so I don't think that is the problem, especially in combination with the next comment. (read on) > > Afterwards I get the tempfs & linuxrc & > > Installing packages : (all my packages are the (nf!) or not found & I > get a > > kernel panic stating that I tried to kill init. > It seems that your cdrom is not recognized that reason the > packages are not found. > > If I use all the same .lrp files & kernel on the flash module > everything > > runs fine except for the above mentioned ide-probe & isofs problem. > > Which isn't a real concern when booting from the module. > I expect that you included the flash rom ide support in the kernel > itself. After you boot from the ide-rom, can you mount the cdrom > or at least try to "insmod" the modules from boot/lib one by one > and try to mount the cdrom then. > Perhaps a conflict betweeen the ide driver for the cdrom and the > disk ( Master slave conflict ? ) > Hope I have given you a few hints where you might look for a > solution. After I boot all modules are loaded (according to lsmod) except for isofs.o. If i try to insmod isofs.o I get the same problem, but a mount -t iso9660 /dev/cdrom /mnt works like a charm. So I think I can conclude that there is nothing wrong with the modules, can't I? I am affraid this also rules out master/slave problems. Correction this definitely rules out master/slave since flashrom is on ide channel 0 & cdrom on ide channel 1. I didn't include ideflash support in the kernel by the way, the apacer module uses the ide specifiaction and does not need anything special to work. Kim ------------------------------------------------- This mail sent through Tiscali Webmail (http://webmail.tiscali.be) _______________________________________________________________ Have big pipes? SourceForge.net is looking for download mirrors. We supply the hardware. You get the recognition. Email Us: [EMAIL PROTECTED] ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html