Jim,
I'll take a look if you send it. I can understand the
sleep for regular ethernet cards, but might a better
place for it be in the bridge script? don't know what
kind of problems this would cause.
Jim TerWee wrote:
>
> How about I send you a working floppy image that I use. You can run that and
> see what you see. I can send you off list tonight. If there is interest from
> the group I can post some of the floppy images that I use in our wireless.
> Plus a pcmcia.lrp for Dachstein that includes Prism wireless drivers.
>
> As far as the sleep command that is for a conventional computer. You
> probally don't need it for a laptop as the ethernet is also pcmcia
>
> Jim
> aka snowcrash
>
> >From: Mark A Nordstrand <[EMAIL PROTECTED]>
> >To: Jim TerWee <[EMAIL PROTECTED]>
> >CC: [EMAIL PROTECTED]
> >Subject: Re: [leaf-user] Wireless PCMCIA and bridging
> >Date: Fri, 12 Jul 2002 10:40:34 -0500
> >
> >Jim TerWee wrote:
> > >
> > > One other thing are you loading shorewall? If I remember right I had a
> > > problem with the configuration in shorewall and bridging. I don't use
> >Not using shorewall. One thing at a time, and I
> >don't think it would be appropriate for my setup.
> >
> > > shorewall on my bridge setup's. The laptop you mentioned should not be a
> > > problem as you can prove it works though normal setup. I also use RC2
> >just
> >I agree. Which is why I'm posting (and posting).
> >
> > > because I haven't had a reason to change but it had a bug in the
> >bridging
> > > script which I think was fixed in RC3 might want to double check that it
> >has
> > > been mentioned several times on the list.
> > >
> >I don't know. I'm using RC3 with the updated
> >lrp. I started posting about my problems before
> >the new lrp was released. Other than properly
> >getting at the bridge scripts, I see no difference.
> >
> > > When you boot up what messages do you get from the bridge you should see
> >it
> > > setting up the cards?
> > >
> >I see complaints about eth[01] not existing. Since
> >I didn't see/hear pcmcia bring
> >
> >I've
> >added debuging to the bridge scripts and the pre-up
> >script has IFACE="lo" and IF_BRIDGE_PORTS is empty.
> >I tried setting/forcing expected values ("br0" and
> >"eth0 eth1"). This only delivers the complaints
> >early. The up script has expected values, but since
> >there are no devices, it just falls through at the
> >bottom.
> >
> >I question the sleep in modutils. Playing with the
> >value doesn't make any difference (other than having
> >to wait longer for it to boot).
> >
> >And now some success. This morning I added:
> >
> >brctl addif br0 $DEVICE
> >ip link set dev $DEVICE up
> >
> >to /etc/pcmcia/network, and I can get to the box with
> >both cards but not through it. (side note: this
> >doesn't light up the LED on the wireless card). In
> >my eyes, this is an ugly kludge.
> >
> >--
> >Mark
> >
> >
> >-------------------------------------------------------
> >This sf.net email is sponsored by:ThinkGeek
> >Gadgets, caffeine, t-shirts, fun stuff.
> >http://thinkgeek.com/sf
> >------------------------------------------------------------------------
> >leaf-user mailing list: [EMAIL PROTECTED]
> >https://lists.sourceforge.net/lists/listinfo/leaf-user
> >SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
>
> _________________________________________________________________
> Send and receive Hotmail on your mobile device: http://mobile.msn.com
--
Mark
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Gadgets, caffeine, t-shirts, fun stuff.
http://thinkgeek.com/sf
------------------------------------------------------------------------
leaf-user mailing list: [EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
