Armend Zeqiraj wrote about "Re: [leaf-user] PPPoE in WISP": > > So, what was your problem? > > I installed proftpd sucessfully but BASH didnt go through may i did not have > the right .lrp package.
If you use 8MB flash, then memory on the second partition is tight and may not be enough for standard .lrp packages. Use .cfs or RAM disk instead (delete the second partition). > > Again, what is exactly the problem? E.g., what kind of card you use, what > kind > > of PCMCIA bridge etc etc. I personally run it with a lot of Cisco Aironet > LMC352. > > > > I am using PCI Cisco Aironet 342 and 350 cards. maybe in some old router i > will use ISA Aironet 4800 cards or whatsoever. Still, you didn't answer the question, is it a PCI/ISA or a PCMCIA card? -- Best Regards, Vladimir Systems Engineer (RHCE) ------------------------------------------------------- This sf.net email is sponsored by: Dice - The leading online job board for high-tech professionals. Search and apply for tech jobs today! http://seeker.dice.com/seeker.epl?rel_code=31 ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
