Hi Vladimir, *PPPoE client *,
When i change the provider file putting the username on it and removig the comment at #pty "PPPoE -I .... and changing the file no_ppp_on_boot to ppp_on_boot wehn i run svi start command or when the router boots I get this error message: Starting up PPP link Kernel doesnt support PPP_generic needed for PPPoE > Armend Zeqiraj wrote about "Re: [leaf-user] PPPoE in WISP": > > > > So, what was your problem? > > > > I installed proftpd sucessfully but BASH didnt go through may i did not have > > the right .lrp package. > > If you use 8MB flash, then memory on the second partition is > tight and may not be enough for standard .lrp packages. Use .cfs > or RAM disk instead (delete the second partition). > > > > Again, what is exactly the problem? E.g., what kind of card you use, what > > kind > > > of PCMCIA bridge etc etc. I personally run it with a lot of Cisco Aironet > > LMC352. > > > > > > > I am using PCI Cisco Aironet 342 and 350 cards. maybe in some old router i > > will use ISA Aironet 4800 cards or whatsoever. > > Still, you didn't answer the question, is it a PCI/ISA or a > PCMCIA card? I am using PCI and ISA cards. Best regards Armend Zeqiraj, ------------------------------------------------------- This sf.net email is sponsored by: Dice - The leading online job board for high-tech professionals. Search and apply for tech jobs today! http://seeker.dice.com/seeker.epl?rel_code=31 ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
