I have set up an two wisp-dists ... one as AP and one As Client ( managed mode ).
I double checked all the routes and subnets the AP shows active association of the client. The client shows association to the AP I run "tcpdump -i netcs0" and can see the AP is hearing the client but the client is not hearing anything coming from the AP. Thus, no data can go across the link. I am using the teletronics 100mW cards on the 486 SBC. I tried the pigtale in the second slot ( farthest away from LED's ) and then the AP could not connect to anything. both the client and AP shows a radio association. But the client shows no traffic being received at all when I am sending pings to it from the AP. The AP can hear the arp requests and the pings from the client. I have tried wisp-dist builds 2312 and 2324. Am I missing something obvious here? Any suggestions? thanx ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
