Samuel Abreu wrote about "Re: [leaf-user] Problem with Wisp Init!":
> Ok, i confused things, sorry! > I have already working, one soekris board with 2 orinoco cards, with bridge, > that i change the parprouted line in the parpbridging startup script, to 3 > lines: > /sbin/parprouted $IFACES > sleep 2 > /sbin/parprouted $IFACES > > In if.config: > IFACES="netcs0 netcs1" Hmm... That shouldn't be required. Anyway, the build is old. > I try recently, do the bridge with the new version, with the 3 interfaces, > unsuccessfuly, but i didn't made many tests, it was 2am, and i let that > station without bridge! Please, look at the logs and report what's going on. Or you can give me access to your board and I can check myself. Also I got a 2-PCMCIA Soekris board yesterday, and I plan to do some testing on it. > One question about how arp bridge works, if i want to put one eth and one > netcs in bridge, in what interface i put the IP of the station, in the help, > say that the interfaces must have a IP, even a dummy address, but if a put a > dummy address in eth, will not the eth be the IP of station will > correspont??? It depends on what your Ethernet station uses as a default gateway. If it uses the IP of the CPE itself as a default gateway, then obviously IP on the eth0 should be from the same subnet as the IP of the station; however I don't recommend doing this. -- Best Regards, Vladimir Systems Engineer (RHCE) ------------------------------------------------------- This sf.net email is sponsored by: To learn the basics of securing your web site with SSL, click here to get a FREE TRIAL of a Thawte Server Certificate: http://www.gothawte.com/rd524.html ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
