Is there a module parameter I can use to assign i/o addresses for the nics? I've seen instructions on how to do this for isa nics but not for pci ones.
Thanks, Stephen On Thu, 2002-11-14 at 23:09, Reginald R. Richardson wrote: > Make sure that none of the NICS has the same i/o address.. > > 4 nics should be no problem > > > -----Original Message----- > > From: Stephen Lee [mailto:[EMAIL PROTECTED]] > > Sent: Friday, November 15, 2002 03:48 > > To: Leaf-user > > Subject: [leaf-user] 4 nics with Bering > > > > > > Hi, > > > > I've got 4 RTL8139c nics in a Bering 1.0rc2 box but only 3 > > are detected by the kernel. Is a boot time kernel parameter > > required to detect the 4th nic? If yes then what is the > > append parameter to use? BTW, PNP OS is off in the Bios. > > > > Thanks, > > Stephen > > > ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
