On Tue, 2003-01-28 at 05:46, John Mullan wrote: > I have set up Bering on Bell DSL. Following the user guide works pretty > straight forward. However, when it came to using the username/password for > connection, there was a point I wasn't aware of and it made the difference > between connecting and not connecting. > > There are two files where to enter this information. From work here, I > cannot recall but I believe it is in the Modules -> PPPoE setup. One file > you enter the various possible logins you could use (ie; > username/password). The other is where you indicate which username you > wish to login with. Other than that, the preconfigured defaults worked > fine for me.
Are you refering to both menu items under "pppoe configuration files" corresponding to /etc/ppp/peers/dsl-provider and /etc/ppp/pap-secrets respectively? I take it then that Bell uses PPPoE with PAP? Thanks, Stephen ------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html