Hi all the list, Hi again Stephen, YES, this is better with 'ttyS0' than 's0' ;-)
This is the complete console response to the Bering boot. It seems to be a (big) problem with the CD/IDE modules... Loading linux........... Loading initrd.lrp.......... ready. Linux version 2.4.18 (root@uml_woody) (gcc version 2.95.4 20011002 (Debian prere lease)) #1 Sun Nov 10 17:40:20 UTC 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000004000000 (usable) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) On node 0 totalpages: 16384 zone(0): 4096 pages. zone(1): 12288 pages. zone(2): 0 pages. Kernel command line: console=ttyS0,19200 BOOT_IMAGE=linux initrd=initrd.lrp init =/linuxrc root=/dev/ram0 boot=/dev/cdrom:iso9660 PKGPATH=/dev/cdrom:iso9660,/dev /fd0u1680:msdos Initializing CPU#0 Detected 735.000 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1464.72 BogoMIPS Memory: 62232k/65536k available (907k kernel code, 2920k reserved, 232k data, 60 k init, 0k highmem) Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes) Inode-cache hash table entries: 4096 (order: 3, 32768 bytes) Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel Celeron (Coppermine) stepping 06 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX PCI: PCI BIOS revision 2.10 entry at 0xfb270, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router VIA [1106/0596] at 00:07.0 Activating ISA DMA hang workarounds. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ DETECT_IRQ SE RIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Software Watchdog Timer: 0.05, timer margin: 60 sec block: 128 slots per queue, batch=32 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 4096) Linux IP multicast router 0.06 plus PIM-SM ip_conntrack version 2.0 (512 buckets, 4096 max) - 312 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 483k freed VFS: Mounted root (minix filesystem). Freeing unused kernel memory: 60k freed LINUXRC: Bering - Initrd - V1.0-stable Using /boot/lib/modules/cdrom.o insmod: unresolved symbol gr_is_capable Using /boot/lib/modules/ide-mod.o insmod: unresolved symbol pci_enable_device_bars insmod: unresolved symbol gr_is_capable Using /boot/lib/modules/ide-cd.o insmod: unresolved symbol ide_wait_stat insmod: unresolved symbol cdrom_mode_select insmod: unresolved symbol cdrom_open insmod: unresolved symbol cdrom_release insmod: unresolved symbol register_cdrom insmod: unresolved symbol cdrom_ioctl insmod: unresolved symbol ide_do_reset insmod: unresolved symbol ide_register_module insmod: unresolved symbol atapi_output_bytes insmod: unresolved symbol ide_error insmod: unresolved symbol cdrom_mode_sense insmod: unresolved symbol ide_unregister_module insmod: unresolved symbol cdrom_media_changed insmod: unresolved symbol unregister_cdrom insmod: unresolved symbol ide_dump_status insmod: unresolved symbol ide_unregister_subdriver insmod: unresolved symbol atapi_input_bytes insmod: unresolved symbol cdrom_get_last_written insmod: unresolved symbol ide_do_drive_cmd insmod: unresolved symbol ide_scan_devices insmod: unresolved symbol ide_stall_queue insmod: unresolved symbol ide_set_handler insmod: unresolved symbol ide_register_subdriver insmod: unresolved symbol init_cdrom_command insmod: unresolved symbol cdrom_number_of_slots insmod: unresolved symbol ide_init_drive_cmd insmod: unresolved symbol ide_add_setting insmod: unresolved symbol ide_end_request Using /boot/lib/modules/ide-probe-mod.o insmod: unresolved symbol ide_input_data insmod: unresolved symbol do_ide_request insmod: unresolved symbol ide_get_queue insmod: unresolved symbol ide_hwifs insmod: unresolved symbol ide_timer_expiry insmod: unresolved symbol ide_end_request: I/O error, dev 02:00 (floppy), sector 0 add_generic_settings insmod: unresolved symbol current_capacityend_request: I/O error, dev 02:00 (flo ppy), sector 0 insmod: unresolved symbol get_info_ptr insmod: unresolved symbol ide_xlate_1024_hook insmod: unresolved symbol ide_delay_50ms insmod: unresolved symbol ide_probe insmod: unresolved symbol ide_intr insmod: unresolved symbol ide_fops insmod: unresolved symbol ide_fixstring insmod: unresolved symbol create_proc_ide_interfaces insmod: unresolved symbol drive_is_flashcard insmod: unresolved symbol ide_unregister Using /boot/lib/modules/isofs.o insmod: unresolved symbol zone_table Mounting a 6M TMPFS filesystem... LINUXRC: Could nKernel panic: Attempted to kill init! ot mount the boo t device. Can't install packages. > -----Message d'origine----- > De : [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]De la part de Stephen Lee > Envoyé : dimanche 2 février 2003 17:24 > À : Francois BERGERET > Cc : Leaf-user > Objet : RE: [leaf-user] 1.0-stable CD frozzen at boot after READY > ...SNIP SNIP SNIP... > > serial 0 19200 > > display syslinux.dpy > > timeout 0 > > append console=ttys0,19200 > > default linux initrd=initrd.lrp init=/linuxrc root=/dev/ram0 >boot=/dev/cdrom:iso9660 > PKGPATH=/dev/cdrom:iso9660,/dev/fd0u1680:msdos > > > > In the append line make sure you have ttyS0 and not ttys0 > ^ > HTH... > > Stephen > > > > > ------------------------------------------------------- > This SF.NET email is sponsored by: > SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! > http://www.vasoftware.com > ------------------------------------------------------------------------ > leaf-user mailing list: [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/leaf-user > SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html > ------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html