On Friday 07 February 2003 01:23 am, Camille King wrote: > Could somebody explain to me how to setup wireless networking (Linksys > AP/Router/4-Port Switch) and Bering? Right now, my setup is a p200 > connected my Linksys using one of the Lan ports. Then, my desktop is > connected to another port. > > Although I understand that I need to change the Linksys to Static IP (IP > 192.168.1.240) that follows the documentation and I'm supposed to disable > DHCP, what sort of settings does the network card take? If I disable DHCP, > do I give the network card a static IP as well? > > Any help would be greatly appreciated.
You use the AP and switch functions on the Linksys.... don't connect the WAN side of it or route. This connects the wired LAN to the wireless LAN on the same network and your wireless cards can get dhcp from leaf across the "bridged" Linksys. -- ~Lynn Avants Linux Embedded Firewall Project developer http://leaf.sourceforge.net ------------------------------------------------------- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
