Hello, I have a problem accessing the weblet page after I have changed the internal ip numbers to a public address. I am using Bering Stable 1.2 with two interfaces eg ppp0 and eth0. Both are using public ip numbers. I am not able to access the firewall web page. I doubled checked all my settings including all the settings in Shorewall. Everything else works fine. I even built another system as a test. And still, I am unable to get access to the web page. I then decided to build another system and use the distro as it comes from the floppy image. The only changes I made was the external ip number and added a driver for my network card. I am using eth0 and eth1 and NAT. Eg public ip on eth0 and private on eth1. All works fine. So the only conclusion that I can come to is that there is something still referring to the private address range in the original system. I have had a poke around and can not find anything that I feel would cause this.
So what else should I be checking? Any other ideas? Thanks in advance for any help. Regards, Robert McRostie. ------------------------------------------------------- This SF.Net email sponsored by: Parasoft Error proof Web apps, automate testing & more. Download & eval WebKing and get a free book. www.parasoft.com/bulletproofapps1 ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html