Hi the list, I am using Soekris embeded PC with Bering V1.2 and hostap drivinf two PCMCIA prism Intersil cards. I want DHCPD for ETH1, WLAN0, and WLAN1 subnets. My declarations are ok.
But, DHCPD start too soon before than hostap and the two attached wlan interfaces are ok, scratching dhcpd which stop... See this following log extract : Aug 24 19:46:01 firewall dhcpd: Internet Software Consortium DHCP Server 2.0pl5 Aug 24 19:46:01 firewall dhcpd: Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium. Aug 24 19:46:01 firewall dhcpd: All rights reserved. Aug 24 19:46:01 firewall dhcpd: Aug 24 19:46:01 firewall dhcpd: Please contribute if you find this software useful. Aug 24 19:46:01 firewall dhcpd: For info, please visit http://www.isc.org/dhcp-contrib.html Aug 24 19:46:01 firewall dhcpd: Aug 24 19:46:01 firewall dhcpd: No subnet declaration for wlan1 (0.0.0.0). Aug 24 19:46:01 firewall dhcpd: Please write a subnet declaration in your dhcpd.conf file for the Aug 24 19:46:01 firewall dhcpd: network segment to which interface wlan1 is attached. Aug 24 19:46:01 firewall dhcpd: exiting. If I launch again dhcpd by hand as : dhcpd eth1 wlan0 wlan 1 All is magicaly ok : Internet Software Consortium DHCP Server 2.0pl5 Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium. All rights reserved. Please contribute if you find this software useful. For info, please visit http://www.isc.org/dhcp-contrib.html ipsec0: unknown hardware address type 512 Listening on LPF/wlan1/00:60:b3:76:c7:bd/192.168.2.0 Sending on LPF/wlan1/00:60:b3:76:c7:bd/192.168.2.0 Listening on LPF/wlan0/00:60:b3:72:db:ef/44.151.177.64 Sending on LPF/wlan0/00:60:b3:72:db:ef/44.151.177.64 Listening on LPF/eth1/00:00:24:c0:e9:6d/192.168.1.0 Sending on LPF/eth1/00:00:24:c0:e9:6d/192.168.1.0 Sending on Socket/fallback/fallback-net I have tempted to add this "manual command" in the Shorewall "Start" (21) command file and saving it. Sure, if I input :"shorewall restart" this is working, but, nothing is realy saved in any file and at Bering shutdown this little modification is lost... Where and how can I change something to force dhcpd to start after shorewall is ready ? Help me please... TIA and Best Regards, Francois BERGERET, France. ------------------------------------------------------- This SF.net email is sponsored by: VM Ware With VMware you can run multiple operating systems on a single machine. WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the same time. Free trial click here:http://www.vmware.com/wl/offer/358/0 ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
