Try editing /etc/init.d/dhcpd and change the RCDLINKS definition.
Make sure the 'S' numbers on this line are greater than those defined
in the /etc/init.d/pcmcia file. If you still have problems,
you might need to put in a sleep at the start of /etc/init.d/dhcpd, 
to allow cardmgr time to initialise the cards before dhcpd starts.

Cheers,
Dave.


> -----Original Message-----
> From: [EMAIL PROTECTED] 
> [mailto:[EMAIL PROTECTED] On Behalf Of 
> Francois BERGERET
> Sent: 24 August 2003 21:02
> To: 'LEAF-USER'
> Subject: [leaf-user] Bering 1.2 dhcpd doesn't start with 
> wlan/hostap or other "too late" interface up
> 
> 
> Hi the list,
> 
> I am using Soekris embeded PC with Bering V1.2 and hostap 
> drivinf two PCMCIA prism Intersil cards.
> I want DHCPD for ETH1, WLAN0, and WLAN1 subnets.
> My declarations are ok.
> 
> But, DHCPD start too soon before than hostap and the two 
> attached wlan interfaces are ok, scratching dhcpd which stop...
> 
> See this following log extract :
> 
> Aug 24 19:46:01 firewall dhcpd: Internet Software Consortium 
> DHCP Server 2.0pl5
> Aug 24 19:46:01 firewall dhcpd: Copyright 1995, 1996, 1997, 
> 1998, 1999 The Internet Software Consortium.
> Aug 24 19:46:01 firewall dhcpd: All rights reserved.
> Aug 24 19:46:01 firewall dhcpd:
> Aug 24 19:46:01 firewall dhcpd: Please contribute if you find 
> this software useful.
> Aug 24 19:46:01 firewall dhcpd: For info, please visit 
> http://www.isc.org/dhcp-contrib.html
> Aug 24 19:46:01 firewall dhcpd:
> Aug 24 19:46:01 firewall dhcpd: No subnet declaration for 
> wlan1 (0.0.0.0).
> Aug 24 19:46:01 firewall dhcpd: Please write a subnet 
> declaration in your dhcpd.conf file for the
> Aug 24 19:46:01 firewall dhcpd: network segment to which 
> interface wlan1 is attached.
> Aug 24 19:46:01 firewall dhcpd: exiting.
> 
> If I launch again dhcpd by hand as :
> dhcpd eth1 wlan0 wlan 1
> 
> All is magicaly ok :
> 
> Internet Software Consortium DHCP Server 2.0pl5
> Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software 
> Consortium.
> All rights reserved.
> 
> Please contribute if you find this software useful.
> For info, please visit http://www.isc.org/dhcp-contrib.html
> 
> ipsec0: unknown hardware address type 512
> Listening on LPF/wlan1/00:60:b3:76:c7:bd/192.168.2.0
> Sending on   LPF/wlan1/00:60:b3:76:c7:bd/192.168.2.0
> Listening on LPF/wlan0/00:60:b3:72:db:ef/44.151.177.64
> Sending on   LPF/wlan0/00:60:b3:72:db:ef/44.151.177.64
> Listening on LPF/eth1/00:00:24:c0:e9:6d/192.168.1.0
> Sending on   LPF/eth1/00:00:24:c0:e9:6d/192.168.1.0
> Sending on   Socket/fallback/fallback-net
> 
> I have tempted to add this "manual command" in the Shorewall 
> "Start" (21) command file and saving it. Sure, if I input :"shorewall
> restart" this is working, but, nothing is realy saved in any 
> file and at Bering shutdown this little modification is lost...
> 
> Where and how can I change something to force dhcpd to start 
> after shorewall is ready ?
> 
> Help me please...
> TIA and Best Regards,
> Francois BERGERET,
> France.
> 
> 
> 
> -------------------------------------------------------
> This SF.net email is sponsored by: VM Ware
> With VMware you can run multiple operating systems on a 
> single machine.
> WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines
> at the same time. Free trial click 
> here:http://www.vmware.com/wl/offer/358/0
> --------------------------------------------------------------
> ----------
> leaf-user mailing list: [EMAIL PROTECTED]
> https://lists.sourceforge.net/lists/listinfo/leaf-user
> SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
> 



-------------------------------------------------------
This SF.net email is sponsored by: VM Ware
With VMware you can run multiple operating systems on a single machine.
WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines
at the same time. Free trial click here:http://www.vmware.com/wl/offer/358/0
------------------------------------------------------------------------
leaf-user mailing list: [EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/leaf-user
SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html

Reply via email to