Hello All, Some more Q's after starting to build Alex's big network.
Well, after an industrious Sunday, I've managed... well, not that much really. Two big problems I ran up against. One of the NICs required the rtl8139.o module. But this would not load without pci-scan.o loaded. I only found that out through trial, error and random poking around on the internet. Is there a way of looking up module dependency? And the Big Problem. I wasn't expecting it to be quite so difficult to attach USB ADSL modems, I guess I'm just spoilt with my cable modem just giving me and Ethernet port and DHCP services. Although there are Eagle.lrp and SpeedTch.lrp packages, the two ADSL modem available are a Zoom 5510A and a BT Voyager. I found this about the Voyager: "This modem is based on the GT3180 and GS7070 chips from Globespan Virata" I found that information here: http://www.thecaretaker.org.uk/drivers/btvoyager/btvoyagerlinux.htm Although I admit I ran out of time and have not yet had enough time to thoroughly study that page. I noticed that nasty word "compile" in there though... And finish with a small query: There are two 3c59x.o files in the Bering_1.2_modules_2.4.20.tar.gz One works (36Kb file) and one fails with Unresolved Symbol errors to do with ACPI and pci_register (30Kb file) Once again, how could I have found out that this was so? Thanks, James. ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
