Hi! Comments from a WRAP user ;)
>-----Original Message----- >From: Martin Hejl [mailto:[EMAIL PROTECTED] >Hyperterminal, at least in my experience). The biggest hurdle here is >finding the proper terminal settings (default should be 9600 8N1 - but >as I said, I haven't used a WRAP box yet). It _should_ be mentioned in >the manual though. Well, there are two settings, 9600 and 38400, BIOS selectable. >happen to have lying around in your electronics junk box). Most of the >problems I've seen on the various mailing lists are due to marginal >power supplies (marginal in the sense that they provide enough power for >average usage, but fail and cause the box to crash/lock up if for some >reason power consumption jumps up). Guilty! It has happened to me after adding the wireless card... >To get going (the easy way), the only thing else you need is a CF card >reader (if you don't want to boot with PXE - I don't know if the WRAP >boards support that), so you can transfer the base image to the compact >flash card (it's also convenient to get your box back up and running if >you've mis-configured it in a way that it will no longer boot - it's >happened to me a few times, and being able to pop in the CF into my >desktop and fix things saved a lot of time). No, the WRAP board does not support PXE booting, and you have to prepare the CF first. Personally I edit the files in my Windows system, and transfer it to the CF using na USB card reader. I even use syslinux from within Windows itself. >I hope that helps > >Martin Luis Correia ------------------------------------------------------- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click ------------------------------------------------------------------------ leaf-user mailing list: leaf-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/leaf-user Support Request -- http://leaf-project.org/