Hello all,
I help a friend to upgrade his Bering-U (v2.2.2 - kernel 2.4.26) to the
latest and greatest v2.4-beta1 (kernel 2.4.32) and at the same time move
from PC to WRAP box. He has 2 static IPs (x.x.x.11 and x.x.x.12) and the
setting in network/interfaces file on the old router is
auto eth0
iface eth0 inet static
address x.x.x.11
netmask 255.255.255.0
broadcast x.x.x.255
gateway x.x.x.1
# secondary IP
up ip addr add x.x.x.12/24 dev eth0
I use the same settings for the new etc.lrp on WRAP box.
From the old router, I can ping both IP, x.x.x.11 and x.x.x.12 from outside.
But when booting WRAP, I can ping only the first one, x.x.x.11 but not the
other. We also turn on shorewall logging to make sure ping is allowed and we
did not see anything regarding this 'ping'. My friend rebooted the ADSL
modem but results are the same. When he connect back to the old router,
things are OK again and I can ping both IPs.
Is that possible that the ISP keeps the old information about the card (e.g.
MAC address) and so we need to turn off ADSL for a while to flush the cache
or the syntax in 2.4.32 kernel has changed or is there anything I did wrong?
Thank you for any suggestions.
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
------------------------------------------------------------------------
leaf-user mailing list: [email protected]
https://lists.sourceforge.net/lists/listinfo/leaf-user
Support Request -- http://leaf-project.org/
