Izzy Blacklock wrote:
I'm trying to configure a new router using Bering-uClibc 3.1. I have
two nics that use the same driver 3c59x. Typing:
insmod 3c59x
loads the module, but only configures eth0. The output from insmod
seems to indicate it found two cards though. All the docs I've found
seem to say I need to set to module aliases to get the driver to load
for both cards.
alias eth0 3c59x
alias eth1 3x59x
I have a box with 3 of those cards. Looks like Bering 3.0
charon# uname -a
Linux charon 2.4.33 #1 Mon Sep 4 15:52:08 CEST 2006 i686 unknown
charon# ip link
1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
15: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:60:97:c8:38:2f brd ff:ff:ff:ff:ff:ff
16: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:50:04:d9:94:4b brd ff:ff:ff:ff:ff:ff
17: eth2: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:04:75:ff:50:89 brd ff:ff:ff:ff:ff:ff
charon#
from /etc/modules
....
# PCI ethernet cards
3c59x options=0x000
....
cheers
Erich
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
------------------------------------------------------------------------
leaf-user mailing list: leaf-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/leaf-user
Support Request -- http://leaf-project.org/
