.. why is adding wlan0 to the bridge not supported ? Other distros do support it. Is there a way round in Leaf ?
2011/2/20 Juergen Northe <juergen.nor...@googlemail.com>: > Hi David! > added "spanning tree protocol" and "LLC core" modules and .... tataaa > : - it works! > And thank you for updating the wiki in speed of light. > > Juergen > > 2011/2/20 davidMbrooke <dmb.leaf-u...@ntlworld.com>: >> On Sun, 2011-02-20 at 15:53 +0100, Juergen Northe wrote: >>> Hello, >>> I can't create a bridge because brctl command complains about missing >>> package bridge.I followed the instruction >>> http://leaf.sourceforge.net/doc/bubridge.html >>> and added the bridge.ko module into modules.lrp package. The via_rhine >>> is included by default. >>> >>> brctl addbr br0 >>> add bridge failed: Package not installed >>> >>> So I checked these items but can't find the missing point: >>> grep bridge /etc/modules >>> bridge >>> >>> ls -l /lib/modules/bridge.ko >>> -rwxr-xr-x 1 root root 79985 Feb 20 15:17 >>> /lib/modules/bridge.ko >>> >>> lsmod | grep via >>> via_rhine 14097 0 - Live 0x90ac6000 >>> mii 2658 1 via_rhine, Live 0x90ab6000 >>> crc32 8979 2 mac80211,via_rhine, Live 0x90aaa000 >>> >>> grep brid /lib/modules/modules.dep >>> bridge.ko: >>> >>> cat /var/lib/lrpkg/bridge.version >>> 1.2 Rev 1 uClibc 0.9.30.3 >>> >>> grep bridge /mnt/sda1/leaf.cfg >>> LRP="root config etc modules mawk iptables dhcpcd keyboard libm libnl >>> libssl libcrpto libelf libz libpcap ppp pppoe bridge wireless madwifi >>> tcpdump perl shorwall sshkey sshd ssh dropbear hostapd ncurses tcpdump >>> tc radius mhttpd webconf rsync elvis ntpd" >>> >>> What is missing to get brctl working ? I found the thread "Bridge=Yes >>> in Shorewall" but this does not fit to 2.6 kernel of 4.0x version. >>> Thanks in advance. >>> Regards >>> Juergen >> >> Hi Juergen, >> >> So the "add bridge failed: Package not installed" seems to be >> complaining that Module bridge.ko is not installed in the running kernel >> (so not reported with "lsmod"). >> >> You need to copy bridge.ko into /lib/modules/ >> Then you need to run "depmod" >> Then you need to run "modprobe bridge" >> >> I found that I also had to copy stp.ko and llc.ko into /lib/modules/ >> before "modprobe bridge" would work. >> >> Check for errors in /var/log/messages after you run "modprobe bridge". >> Normally errors like "bridge: Unknown symbol llc_mac_hdr_init (err 0)" >> can be solved by also copying module llc.ko into /lib/modules/ and >> trying again. >> >> I see that http://leaf.sourceforge.net/doc/bubridge.html has not been >> migrated to the new Wiki User Guide. I will fix that and update the >> content for Bering-uClibc 4.x >> >> davidMbrooke >> >> >> >> ------------------------------------------------------------------------------ >> The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: >> Pinpoint memory and threading errors before they happen. >> Find and fix more than 250 security defects in the development cycle. >> Locate bottlenecks in serial and parallel code that limit performance. >> http://p.sf.net/sfu/intel-dev2devfeb >> ------------------------------------------------------------------------ >> leaf-user mailing list: leaf-user@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/leaf-user >> Support Request -- http://leaf-project.org/ >> > > > > -- > > > > mit freundlichem Gruss > Jürgen Northe > -- mit freundlichem Gruss Jürgen Northe ------------------------------------------------------------------------------ The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: Pinpoint memory and threading errors before they happen. Find and fix more than 250 security defects in the development cycle. Locate bottlenecks in serial and parallel code that limit performance. http://p.sf.net/sfu/intel-dev2devfeb ------------------------------------------------------------------------ leaf-user mailing list: leaf-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/leaf-user Support Request -- http://leaf-project.org/
