Hi David

i read this answer only today! Sorry!

Today I have tring to boot on the same Soekris Engineering net4501 using 
the 486-ser 4.0rc1 version but i have the same problem.

I will try to edit initrd.lrp next week.
Thanks in advance
Graziano



Il 05/02/2011 17.56, davidMbrooke ha scritto:
> On Thu, 2011-02-03 at 12:07 +0100, Graziano Brioschi wrote:
>> Hi list
>>
>> one more question: si there  a procedure to add the correct IDE driver
>> to my system?
>> Are there some docs about adding additional modules in initrd package?
>>
>> Thanks in advance
>> Graziano
> Hi Graziano,
>
> Presumably you still have a problem with this?
>
> There is currently no documented procedure for editing initrd.lrp, but
> there should be so I will add that to the Wiki User Guide today. (It is
> not so hard but the cpio command syntax is a little strange if you are
> not used to it - I always have to refer to notes myself.)
>
> Have you been able to check whether the kernel Module(s) the net4501
> needs are present in modules.tgz? If not, are they part of the standard
> Linux kernel source code (and hence can be added with a change to the
> kernel .config)?
>
> davidMbrooke
>
>> Erich,
>> thanks for answer. I agree with you.
>>
>> Will there be future support for net4501?
>>
>> cheers
>> Graziano
>>
>> Il 03/02/2011 11.35, Erich Titl ha scritto:
>>>   Graziano
>>>
>>>   Am 03.02.2011 05:53, schrieb Graziano Brioschi:
>>>>   Hello list,
>>>>
>>>>   I'm trying to install LEAF 4 i486 in a Soekris Engineering net4501 (CPU
>>>>   AMD Elan SC520, 64Mb RAM) with no success.
>>>>   During boot, on my serial console i can see:
>>>>
>>>>   Loading /syslinux/linux.....................................
>>>>   Loading /initrd.lrp....................................ready..
>>>>
>>>>   but nothing more...
>>>>   The same compact flash boots correctly on a Soekris Engineeering net4801
>>>>   (CPU AMD Geode 266, 128 MB RAM).
>>>>   I have used the Bering-uClibc_4.0-beta2_i486_syslinux_ser.tar.gz file
>>>>   for this test installation
>>>>
>>>>   Any Ideas?
>>>   IDE drivers for the SC520 are probably not in your initrd.
>>>
>>>   cheers
>>>
>>>   Erich
>
>
> ------------------------------------------------------------------------------
> The modern datacenter depends on network connectivity to access resources
> and provide services. The best practices for maximizing a physical server's
> connectivity to a physical network are well understood - see how these
> rules translate into the virtual world?
> http://p.sf.net/sfu/oracle-sfdevnlfb
> ------------------------------------------------------------------------
> leaf-user mailing list: leaf-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/leaf-user
> Support Request -- http://leaf-project.org/

-- 

Graziano Brioschi

Outland s.a.s.
sede operativa:
Via A. Don Rocca, 13
20030, Senago (MI)
tel: 02 9948 6014
mobile: 328 8382622
email: graziano.brios...@outland.it
-->  U4E<--


------------------------------------------------------------------------------
Fulfilling the Lean Software Promise
Lean software platforms are now widely adopted and the benefits have been 
demonstrated beyond question. Learn why your peers are replacing JEE 
containers with lightweight application servers - and what you can gain 
from the move. http://p.sf.net/sfu/vmware-sfemails
------------------------------------------------------------------------
leaf-user mailing list: leaf-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/leaf-user
Support Request -- http://leaf-project.org/

Reply via email to