Am Montag, 19. Januar 2015, 18:56:00 schrieb Timothy Wegner: > I have encountered a small Shorewall issue after upgrading from > Bering-uClibc_5.1.3-beta1 to 5.1.3-rc1. I'm using my Bering Soekris > box as a firewall/router that gets it's IP from Comcast via DHCP. I am > running the Bering-uClibc_5.1.3-rc1_x86_64_syslinux_vga.tar.gz version > modified to use the serial port. > > During boot I get this error: > > Starting "Shorewall firewall": ERROR: Can't determine the IP address of > eth0 Terminated > > Then I run WebConf from a machine on my network, see that Shorewall is > not running, and start it manually. Shorewall starts with no problems, > and then everything appears to be very good. > > Shorewall gets it's IP from shorewall/params: > > ETH0_IP=`find_first_interface_address eth0` > > Looks like some change between beta1 and rc1 is causing a problem. If > anyone has an idea where to look, let me know. Meanwhile I can > systematically look at what is different.
Hi Tim; in case you use dhcpcd there has been a change which may cause the problem. +# Switch to background immediately, not stopping boot process +background If so you may try to comment out the option and see if it works. kp ------------------------------------------------------------------------------ New Year. New Location. New Benefits. New Data Center in Ashburn, VA. GigeNET is offering a free month of service with a new server in Ashburn. Choose from 2 high performing configs, both with 100TB of bandwidth. Higher redundancy.Lower latency.Increased capacity.Completely compliant. http://p.sf.net/sfu/gigenet ------------------------------------------------------------------------ leaf-user mailing list: leaf-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/leaf-user Support Request -- http://leaf-project.org/