Hi Timothy Am 21.11.2015 um 18:37 schrieb Timothy Wegner: > Erich, > > You are correct that the Soekris net4801 has a Geode CPU (boot screen > says CPU Geode SC1100 267 Mhz). However, in the past I never got the Leaf > Geode version to work, and when I tried it just now, I just got garbage on > the screen after the bios message. > > I searched the mailing lists and found a message from Tom Erjavec dated > 2015-03-26 13:41:06 stating that on his Wrap board with the same Geode > SC1100 CPU, the Geode distribution doesn't work but the 486 version does. > He speculated that "geode" code is for newer ALIX or APU.
It actually is, I never tried it. And all my tests on the 5.2.x were on an ALIX system. I _believe_ the Geode SC1100, which I liked a lot on the WRAP boards, may not be compatible. I would actually like a SC1100 compatible variant with a very small module set and specifically the SC1100 watchdog enabled. > > I will wait for KP's 486 version, and will happily test it at the first > opportunity. Meanwhile, the 486 variant of LEAF Bering-uClibc 5.2 works > perfectly on the Soekris net4801. Good, you may be aware that I was working on some upgrade features for the last few months. 5.2.1++ will be the starting version. We hope that from this release the box will be able to upgrade itself without much user intervention. If you have specific requirements, let us know (or better do it yourself and contribute :-) ) cheers Erich ------------------------------------------------------------------------------ ------------------------------------------------------------------------ leaf-user mailing list: leaf-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/leaf-user Support Request -- http://leaf-project.org/