Hello, Something went wrong with my last flash of an archer c7 v2, and now the device refuses to boot. I'm trying to unbrick it without success since.
1. TFTP seems to work, and I can send a recovery bin. I used a stripped firmware from here http://www.friedzombie.com/tplink-stripped-firmware/ - which used to work great. Unfortunately the router drops the connection after 30seconds without installing the new firmware. The openwrt wiki mentions the possibility of a header incompatibility when the flashing is corrupted, causing the TFTP recovery service to reject the new firmware. The whole thing is rather cryptic to me, and any help would be greatly appreciated. 2. I tried to get a serial access to the device, unfortunately all I get is gibberish. Tried 115200 and 9600 baudrates, 8 bit, no parity, 1 stop bit, no flow control with either CP2102 or PL2303 usb uart dongles. Also, I can't boot the device with the ground wire from either uart plugged in. Lights turns on, and just freeze. Wasted tons of hours on this, and would really be thankful for any advice/pointers. best regards, Felix _______________________________________________ Lede-dev mailing list Lede-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/lede-dev