Wow! I cant wait to see your new railing, it sound great.
I wish you the best of luck on finnishing this project.
C.A.G.
----- Original Message -----
From: "Tim Rinehart" <[email protected]>
To: "Legacy Ornamental Mills" <[email protected]>
Sent: Wednesday, April 27, 2011 2:51 PM
Subject: Re: New Spur Drive
I recently completed some rope twist spindles for my deck. I have
about 70 lineal feet of decking rail, and about 150 spindles
thereabouts. Every third is a rope twist...I ain't crazy!!!...er, not
totally crazy.
I didn't want the rope the full length, and so had to use my lathe to
make the clean transition from square 2x2 to round for roughing at the
Legacy and then turning the 3 twist ropes.
Anyway...I simply cut a shallow (1/8") cross slot in one end of the
2x2s, and marked my centers on the opposite end. I use a standard
spur drive similar to this...
http://www.amazon.com/DELTA-46-933-Spur-Drive-Lathes/dp/B00004Z03T
This engages the slots very easily and even if rotated to different
position, still centers up. I used this same spur drive on my Legacy
and it worked great...especially after having already established a
dimple at the dead center end.
I'll post when I get some deck railing installed...it's in limbo right
now.
On Apr 23, 11:06 pm, "Tim Krause" <[email protected]> wrote:
Definitely not selling this one. It takes me too long to make them
manually. I could farm it out but it would still be expensive for two or
three units.
-Tim
----- Original Message -----
From: "Bill Bulkeley" <[email protected]>
To: <[email protected]>
Sent: Saturday, April 23, 2011 7:37 PM
Subject: Re: New Spur Drive
http://groups.google.com/group/legacy-ornamental-mills/browse_thread/...
> Bill
> ----- Original Message -----
> From: "Groovy Wood LLC" <[email protected]>
> To: <[email protected]>
> Sent: Sunday, April 24, 2011 10:10 AM
> Subject: RE: New Spur Drive
> > Can you remind me with pictures of Tim's items?
> > Thanks
> > |Greg
> > ://groups.google.com/group/legacy-ornamental-mills?hl=en.
> > --
> > You received this message because you are subscribed to the Google
Groups
> > "Legacy Ornamental Mills" group.
> > To post to this group, send email to
> > [email protected].
> > To unsubscribe from this group, send email to
> > [email protected].
> > For more options, visit this group at
> >http://groups.google.com/group/legacy-ornamental-mills?hl=en.
> --
> You received this message because you are subscribed to the Google
> Groups
"Legacy Ornamental Mills" group.> To post to this group, send email to
[email protected].> To unsubscribe from this group,
send email to
[email protected].> For more options,
visit this group at
http://groups.google.com/group/legacy-ornamental-mills?hl=en.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To post to this group, send email to
[email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/legacy-ornamental-mills?hl=en.
--
You received this message because you are subscribed to the Google Groups "Legacy
Ornamental Mills" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/legacy-ornamental-mills?hl=en.
