The tall bracket that holds the wheels are from the template upgrade kit like Bill said. The other angle bracket with two tabs are used to hold the vertical and horizontal vises in place. The wheels look like roller blade wheels that can be bought at sporting goods stores, or you can get them off a used pair of skates at most thrift stores. The bearings are typically 8mm which mount very easily to some 5/16" all- thread or bolt. It should take very little time to make a bracket to hold the wheels. I would think you could get away with only one bracket to hold the wheels.
-Tim ----- Original Message ----- From: "curt george" <curtgeo...@wowway.com> To: <legacy-ornamental-mills@googlegroups.com> Sent: Thursday, June 30, 2011 11:16 AM Subject: Re: thin stock support > Hello Bill > in my manual it states that I can up-grade my machine with longer rail.... > but there are not pictures or anything other than the statement. > It looks like you got everything that you've got, right off the shelf, so to > speak. Even if the parts are still available its hard to order parts with > out seeing if they are the same as what you have. (In short no order no. No > part number.No names,or ??? Makes it very hard to get what you want.) > I will do some home work and see if I can come up with something. ;-) > Thanks for sharing with us. > > C.A.G. > > > > ----- Original Message ----- > From: "Bill Bulkeley" <bulke...@mmnet.com.au> > To: <legacy-ornamental-mills@googlegroups.com> > Sent: Thursday, June 30, 2011 12:40 PM > Subject: Re: thin stock support > > > > the 90 degree brackets I ordered from legacy they were used on a older > > model machine the 200 I believe it was. and the strait brackets are from > > the template rail mounting kit an extra legacy used to sell, I don't know > > if they would still have any I bought several of them once, it was the > > cheapest way of getting some extra rail at the time to lengthen my model > > 900. each one came with the brackets so I ended up with several of them, > > there should be pictures of the kit in your legacy manual that came with > > the machine.I'm sure you guys over there would have a lot easier job > > getting these parts now if > > available than I would way over here in Australia > > Bill > > ----- Original Message ----- > > From: "Groovy Wood LLC" <groovyw...@gmail.com> > > To: <legacy-ornamental-mills@googlegroups.com> > > Sent: Friday, July 01, 2011 2:20 AM > > Subject: RE: thin stock support > > > > > >> Did you buy them or did they come with you machine? I don't have any that > >> look like that and defiantly no extras that look like it. > >> > >> Thanks > >> Greg > >> > >> -- > >> You received this message because you are subscribed to the Google Groups > >> "Legacy Ornamental Mills" group. > >> To post to this group, send email to > >> legacy-ornamental-mills@googlegroups.com. > >> To unsubscribe from this group, send email to > >> legacy-ornamental-mills+unsubscr...@googlegroups.com. > >> For more options, visit this group at > >> http://groups.google.com/group/legacy-ornamental-mills?hl=en. > >> > >> > >> > >> ----- > >> No virus found in this message. > >> Checked by AVG - www.avg.com > >> Version: 10.0.1388 / Virus Database: 1516/3734 - Release Date: 06/29/11 > >> > > > > -- > > You received this message because you are subscribed to the Google Groups > > "Legacy Ornamental Mills" group. > > To post to this group, send email to > > legacy-ornamental-mills@googlegroups.com. > > To unsubscribe from this group, send email to > > legacy-ornamental-mills+unsubscr...@googlegroups.com. > > For more options, visit this group at > > http://groups.google.com/group/legacy-ornamental-mills?hl=en. > > > > -- > You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. > To post to this group, send email to legacy-ornamental-mills@googlegroups.com. > To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en.
