if IM doing an unknown degree taper on the revo I find the length of the
taper I want and the difference in each end diameters
half that and place feeler gauges under the tool at the headstock end of the
taper slide down to the tail stock end and raise that end till it touches
the tool and I use that as a starting point to do the taper, then I take a
cut and check the taper and adjust as necessary
the good thing about the revo is there is only one screw to adjust the
height and taper makes it very easy to adjust I use a dial indicator for
fine adjustments
I don't know if there is any better way but this works for me
Bill
----- Original Message -----
From: "Bill Bulkeley" <bulke...@mmnet.com.au>
To: <legacy-ornamental-mills@googlegroups.com>
Sent: Sunday, August 21, 2011 11:46 AM
Subject: Re: old legacy videos
I bought my revo new and apart from the assembly dvd the training dvd that
came with it is the same one that comes with the 900
at least that is what I received
Bill
----- Original Message -----
From: "SteveEJ" <s.jacobs0...@gmail.com>
To: "Legacy Ornamental Mills" <legacy-ornamental-mills@googlegroups.com>
Sent: Sunday, August 21, 2011 10:06 AM
Subject: Re: old legacy videos
Anyone have the videos that came with the Revo? I bought mine used (no
longer made) and they were not included. I need to make some tapered
legs for a vanity stool. Any ideas here.. I do have a 900 Legacy
Standard CNC but it was used as well and no videos with it either. I
am learning the hard way with as I cannot see in my brain what the
GCode is doing (yet). The Revo is easier for me to see what it will be
doing before I make toothpicks..
Thanks,
Steve
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To post to this group, send email to
legacy-ornamental-mills@googlegroups.com.
To unsubscribe from this group, send email to
legacy-ornamental-mills+unsubscr...@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/legacy-ornamental-mills?hl=en.
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1392 / Virus Database: 1520/3847 - Release Date: 08/20/11
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To post to this group, send email to
legacy-ornamental-mills@googlegroups.com.
To unsubscribe from this group, send email to
legacy-ornamental-mills+unsubscr...@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/legacy-ornamental-mills?hl=en.
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1392 / Virus Database: 1520/3847 - Release Date: 08/20/11
--
You received this message because you are subscribed to the Google Groups "Legacy
Ornamental Mills" group.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
To unsubscribe from this group, send email to
legacy-ornamental-mills+unsubscr...@googlegroups.com.
For more options, visit this group at
http://groups.google.com/group/legacy-ornamental-mills?hl=en.
