I own the legacy vertical one as well and I'm not impressed with it. I wish I would have bought the universal one they where offering for a short period of time. I think the price of the revo was too close to the model 900 to ever really take off. If the Revo was a $495 machine instead of $800 I think it would have sold better. I bought a model 200 well after they had been discontinued. In fact is was one of the members of our group that took a long time to decide to let it go. I hounded him for years until the time was right for both of us. That little machine can do things the 900 and Revo could only dream of :-) After doing some minor mods, it really starts to shine as a small portable wonder.
-Tim ----- Original Message ----- From: "Bill Bulkeley" <bulke...@mmnet.com.au> To: <legacy-ornamental-mills@googlegroups.com> Sent: Saturday, November 05, 2011 5:50 PM Subject: Re: Vertical Mounting Brackets > a very good little mill the revo in some ways better than the 900 I some > times wonder why the sale of them never really took off > with smaller work under 6 inches dia and under 3 foot long I keep coming > back to it over the 900 mill. > a good idea Tim I own a vertical vise from legacy if you ever need pics or > measurements > > Bill > > > ----- Original Message ----- > From: "Tim Krause" <artmarb...@comcast.net> > To: <legacy-ornamental-mills@googlegroups.com> > Sent: Sunday, November 06, 2011 1:44 PM > Subject: Re: Vertical Mounting Brackets > > > When I used it, I was adding some dovetail slots to table legs. I clamped > the legs to wood and cut the angles in both sides of the leg. This was > using the y axis travel. It was similar to what was being used on the revo > at the time. http://legacywoodworking.com/class.cfm?id=42 except they had > theirs setup on the x-axis. I don't have the jig near me or I would set it > up and show you what I did. > > -Tim > > > ----- Original Message ----- > From: "begatbrown" <darylmichaelsc...@gmail.com> > To: "Legacy Ornamental Mills" <legacy-ornamental-mills@googlegroups.com> > Sent: Saturday, November 05, 2011 4:01 PM > Subject: Re: Vertical Mounting Brackets > > > Tim, > > I think I have the concept, but I'd like to see the set up and know > what you did and could use them to do. > > Begat > > On Nov 5, 4:56 pm, "Tim Krause" <artmarb...@comcast.net> wrote: > > Hello All, > > > > A long time ago I made these brackets. I don't think I ever showed them to > the group since they where just a quick solution to a problem I had at the > time. > > > > They mounted to the inside of the inner rails. A board connects the two > and they form a poorman's version of the vertical vises Legacy was selling > at the time. I just clamped my stock to the wood connecting piece. They did > the job but they were slow to setup and remove. I was using Legacy's large > square tabs to mount them to the inner side of the inner rails. I had to > unscrew them to remove the brackets. I've been thinking there is a better > way to do this and I've come up with this drawing. > > > > It still uses a board to connect the two but I'm going to add 1/4-20 > threaded inserts to mount the board to (not shown). The mounts will use my > HD mounts (1/4-20) for the narrow side rails and location tabs (not shown > bent) will instantly align the brackets square. They are 4" in total depth > so they will work on the bench models. Is this a useful idea? > > > > -Tim > > > > brackets_pre.jpg > > 17KViewDownload > > > > new_vertical_mounting_brackets.jpg > > 24KViewDownload > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > To unsubscribe from this group, send email to > legacy-ornamental-mills+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/legacy-ornamental-mills?hl=en. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To post to this group, send email to > legacy-ornamental-mills@googlegroups.com. > To unsubscribe from this group, send email to > legacy-ornamental-mills+unsubscr...@googlegroups.com. > For more options, visit this group at > http://groups.google.com/group/legacy-ornamental-mills?hl=en. > > > > ----- > No virus found in this message. > Checked by AVG - www.avg.com > Version: 2012.0.1869 / Virus Database: 2092/4598 - Release Date: 11/05/11 > > > -- > You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. > To post to this group, send email to legacy-ornamental-mills@googlegroups.com. > To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en.