Hey Joe, Can you give me the view of the carriage from the front and the back of the machine. I can easily see adding a lower bushing in the center or even a bearing to prevent the router from lifting off the rails. Really the question is how often is this happening to you? It could be a sign of you pushing the cut too hard. If you are taking a 1/2" cut with a 2-1/2 barley bit it would be no surprise that things are trying to move (an extreme example but I think my point is clear).
-Tim ----- Original Message ----- From: Joe Gassen To: legacy-ornamental-mills@googlegroups.com Sent: Friday, May 25, 2012 4:38 AM Subject: Re: Owners manual for Legacy 1000 and 1500 Sorry, I forgot to attach On Fri, May 25, 2012 at 6:19 AM, Joe Gassen <wordsmit...@gmail.com> wrote: Dexter, Thanks so much for the scans. Sorry I have not checked mail in a few days, I need to link this account to my daily mail. Attached are the photos of my carriage that rides on two "silver" unistrut rails. It sits on "delrin" I think bushings and is not captured but resists uplift by weight of router only. Any upgrade ideas you have would be greatly appreciated. Thanks again, Joe Gassen On Wed, May 23, 2012 at 4:41 PM, Dexter Bland <dexterbl...@gmail.com> wrote: Attached are two of the more important sections of the 1000ex owners manual for those who don't have one. I have scanned the rest so contat me if you would like the rest. Section 6 explains pretty well questions people have had lately regarding pitch/number of starts/bit size. -- Dexter Bland "All that is necessary for the triumph of evil is for good men to do nothing." Edmund Burke -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. To unsubscribe from this group, send email to legacy-ornamental-mills+unsubscr...@googlegroups.com. For more options, visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en.