Hello Joe most of the Legacy's that I have seen have a MT-2 as well as a 1x8 thread on the head-stock/spindle. This means most of the lathe adapters you own should fit the Legacy, the MT-1 is to small for the Legacy, but you can buy MT 1-2 adapters at any machine shop supply house, they are not expensive.
C.A.G. ----- Original Message ----- From: "Joe G" <wordsmit...@gmail.com> To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, November 4, 2017 10:12:02 PM Subject: Re: Need LOM dogs and split nut I have the threaded headstock with looks like a #2 MT I do have 1" X 8 thread check but it only opens to 3" I think. The legs I were turning for a table are 4" and 5" Sq at top On Sat, Nov 4, 2017 at 8:40 PM, Russ Veinot < ru...@yknotwood.com > wrote: BUY EXTRA !! :>) Oh, I already said that. Does the headstock have a threaded head for adding a 4 jaw chuck? I rarely use my LOM dogs anymore since adding one to my LOM. Does it have the #1 morse taper headstock? From: legacy-ornamental-mills@googlegroups.com [mailto: legacy-ornamental-mills@googlegroups.com ] On Behalf Of Joe Gassen Sent: Saturday, November 04, 2017 7:47 PM To: Legacy Ornamental Mills Subject: Re: Need LOM dogs and split nut Thanks Tim, Ill call back Monday! On Saturday, November 4, 2017 at 4:40:55 PM UTC-5, Tim wrote: Call Legacy back and ask for Cindy. She is in charge of the parts for the manual machines the last time I checked.On Nov 3, 2017 5:05 PM, Russ Veinot < ru...@yknotwood.com > wrote: > > BUY EXTRA !! :>) > > > > From: legacy-orna...@googlegroups.com [mailto: > legacy-ornamental-mills@googlegroups.com ] On Behalf Of Joe G > Sent: Friday, November 03, 2017 6:51 PM > To: legacy-orna...@googlegroups.com > Subject: Re: Need LOM dogs and split nut > > > > Thanks guys for the help. I called Legacy and the man that answered said he > would have someone call me back and he thought they had the parts. > > No call yet..fingers crossed! > > > > > > On Fri, Nov 3, 2017 at 6:31 PM, CURTIS GEORGE < curtg...@wowway.com > wrote: > > Hello again Joe > > > > do you still have the old split nut? Its just the upper half you need? If so > I may be some help for you. I own a home made tap for the 5/8 x 4 acme screw. > I can tap a piece of durlin (SP?) plastic for you, then you can cut it to > fit... > > Please let me know if you still need help on this? > > more latter. > > > > C.A.G. > > > > _____ > > From: "Joe Gassen" < words...@gmail.com > > To: "Legacy Ornamental Mills" < legacy-orna...@googlegroups.com > > Sent: Friday, November 3, 2017 12:07:33 PM > Subject: Need LOM dogs and split nut > > > > I sent an e-mail but later found this board. > > I have an older steel rail LOM and have recently begun to use it again. > > I need at least two of the 4 prong dogs that fit the headstock mad will also > need a split nut in the future for the 5/8 acme. > > Any help will be appreciated since I see Legacy no longer supports the older > LOM s and have also taken down the old training videos. > > Thx all > > > > Joe > > > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at https://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at https://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at https://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.