I think the current limit for Google groups has been raised from 5 mb to 10 
mb...in theory.  I say theory because I have not tested the upper limit, it 
came from a newsgroup I read last year.

Tim

⁣Sent from BlueMail ​

On Feb 4, 2018, 2:41 PM, at 2:41 PM, Bill Bulkeley <bulke...@mmnet.com.au> 
wrote:
>The pictures on craigslist all seem to be under a megabit in size and
>should post ok on the group but that could be craiglist doing that find
>your pictures on your computer do not open instead
>
>Right click on one and choose properties this will tell you how big it
>is if around 1 meg it should post or are you trying to post too many at
>a time all your pictures combined cant be much bigger than 2 or 3 meg
>or it won’t post.
>
>If this is all getting overwhelming email one of your pics to me
>bulke...@mmnet.com.au and i will see if i can post it and see whats
>wrong
>
>Bill
>
> 
>
>From: legacy-ornamental-mills@googlegroups.com
>[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Rg Max
>Sent: Monday, 5 February 2018 4:46 AM
>To: legacy-ornamental-mills@googlegroups.com
>Subject: Re: Working toward a Legacy Mill
>
> 
>
>I posted to craigslist.org - St. Louis, Mo. 6 pictures - hope that
>helps 
>
> 
>
>search = Legacy Mill - Steely 900/1200 Manual CNC 
>
> 
>
>On Sun, Feb 4, 2018 at 5:27 AM, Bill Bulkeley <bulke...@mmnet.com.au>
>wrote:
>
>I just add them to the email if your not using email to post messages
>send one to 
>
>legacy-ornamental-mills@googlegroups.com and attach your pics to that
>and we all should get them unless the picturs are too big to email
>
> 
>
>Bill
>
> 
>
>From: legacy-ornamental-mills@googlegroups.com
>[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Rg Max
>Sent: Sunday, 4 February 2018 4:31 PM
>To: legacy-ornamental-mills@googlegroups.com
>
>
>Subject: Re: Working toward a Legacy Mill
>
> 
>
>New bee here to post pictures of my Legacy - tried three times - write
>for pictures
>
> 
>
>On Wed, Jan 24, 2018 at 11:55 AM, MWF <mwfos...@earthlink.net> wrote:
>
>Arkady and all others,
>
>Here is a link to their website: 
>http://dicoproducts.com/products.php?gid=5
>
>The ones I have used are the:
>4 inch (diameter) Wheel Brush
>4 inch (diameter) Flap Brush
>
>They come in 3 levels of "stiffness" and are colored accordingly -
>Coarse - Gray, Medium - Orange, and Fine - Blue (softest)
>
>I have used all 3 levels of coarseness and am VERY VERY HAPPY with
>them.  They will outlast a wire bristled wheel 100 to one!  You don't
>get those little wires coming off and hitting you in the face.  Nor do
>they leave the little pieces of wire all over your work area when you
>are finished.  
>Price-wise, they may be 2x the price - but I can assure you - WELL
>WORTH more than that!  
>
>Example:  I have a outdoor BBQ grill that needed major clean-up.  In
>the past, I used wire wheels to clean it all down before repainting
>(high temp paint).  It was quite a chore and I'd go through a couple
>wire wheels (good brand name products - not cheap China junk).  This
>past Spring (a year ago), I tackled the job again.  In preparation I
>bought 2 4" Nyalox wheels.  I finished the job using only one wheel.  I
>measured its diameter and compared it to the new/unused one. 
>Imperceptible difference in their diameters!  
>
>Group Members - if you are reading this - has anyone else ever heard of
>the Nyalox brushes?  
>Have you used them?  Your thoughts?
>
>If you have not ever used them - but use wire wheels, I recommend you
>switch to Nyalox immediately. 
>(Full disclosure: I do not work for Nyalox or any business that sells
>them; nor do I own stock in them.  I'm just a very impressed customer.)
>
>Mac
>
>  _____  
>
>  _____  
>
> 
>
>-----Original Message----- 
>From: Arkady Paka 
>Sent: Jan 24, 2018 1:50 AM 
>To: legacy-ornamental-mills@googlegroups.com 
>
>Subject: Re: Working toward a Legacy Mill 
>
>Hello Mac
>
>Nyalox have many items. Which one you use?
>
> 
>
>Arkady.
>
> 
>
>2018-01-24 7:45 GMT+02:00 'Curt George' via Legacy Ornamental Mills
><legacy-ornamental-mills@googlegroups.com>:
>
>Hello Ira
>
>those are nice table legs, (Beautiful wood!) A barley twist leg could
>be done in 45 min  if you start form scratch. But there are ways to get
>the job done much faster is you plan,and remove the waist before
>putting the wood on the Legacy.  Mike Pung has shared his radio lathe
>duplicator with us in the group. (
>http://ornamentalmills.com/turningaround/Pugn3.htm)  If I had to bet,
>He could make those legs in less then half of the time I could make
>those on the Legacy alone.  
>
> 
>
>Having said that, there is almost, always more then one way to do
>anything. If you use your lathe, a peeling cut with a skew, can remove
>wood very fast, if you can get the wood close to finish size before you
>put it on the Legacy, your production time will be much shorter... (How
>you do that is up to you.) ;-)
>
> 
>
>Mac. what you are thinking of is called a reversing gear. so you can
>make both left and right pitches on the Legacy.  
>
>A reminder to everyone, OUR favorite son.(Mr. Tim...) Made a number of
>quick change gear sets, not so long ago.  I own one and Love it.
>
>I don't know if he is willing to make them again, but I do know that he
>has the files and might be persuaded to have someone else make them...
>When there is a will there is ALWAYS a way to get the job done.  But
>asking if the first step. ;-) 
>
> 
>
>Its time for me to hit the hay now.
>
>Have a good night.
>
>C.A.G.
>
> 
>
>On Tuesday, January 23, 2018 7:03 PM, Ira S. Vest <istse...@gmail.com>
>wrote:
>
> 
>
>Mac so you are only the second person to catch that all 4 legs twisted
>the same way. That was one of the first things I did with a twist leg.
>Here is the legs I’m working on now for 2 end tables. They are Black
>Walnut. I wiped one with mineral spirits to show the color. Just
>curious but how long does it take you all with the LOM?                
>      Ira
>
>Error! Filename not specified.
>
>Error! Filename not specified.
>
>Error! Filename not specified.
>
> 
>
>On Tue, Jan 23, 2018 at 11:51 AM MWF <mwfos...@earthlink.net> wrote:
>
>Ira,
>Nice sofa table.  I notice that all 4 legs have their "twist" going the
>same direction.  On a Legacy Ornamental Mill (LOM), if you have the
>adapter/gear piece (don't recall its proper name) that is placed into
>the gear train, you are able to produce twists in the opposite
>direction.  That's a really nice feature.
>As regards sanding:  Check out two products that should make that task
>MUCH easier.  There's a company called Nyalox that makes a FANTASTIC
>product line for cleaning up/smoothing things (metal and wood).  They
>are similar to a wire wheel brush - but 100 TIMES BETTER!!  Our local
>Ace Hdwe store carries a few of their products - and can possibly order
>others.  I will probably never ever buy/use a wire wheel brush again in
>my lifetime.  Nyalox is THE way to go.
>Second great product for "sanding/smoothing" is the sanding mop.  There
>are several product lines/makers of them out there.  They come in a
>wide variety of sizes, styles, and grits.  Pick a few and try them - I
>find them very useful and a time saver.
>We look forward to seeing pics of the end tables you referenced.  Would
>even appreciate pics in the various stages of progress - as you have
>time.
>Have a Wonderful week.
>Mac
>
>PS:  Somehow, I feel the SUBJECT line for this thread should be changed
>to one more relevant to the discussions.
>
>
>  _____  
>
>
>  _____  
>
>
>-----Original Message----- 
>From: Shannon Vest 
>
>Sent: Jan 22, 2018 8:21 PM 
>To: legacy-ornamental-mills@googlegroups.com 
>Subject: Re: New Members and Moderation 
>
>Mac and Bill can you use parts like the z axis off say a 900 on a 1200?
>Also guys there is another thing I have been wondering about. Is there
>a lot of sanding and forming still after you run a design. I have done
>some spiral legs in the past on a old Craftsman Router Crafter. I end
>up spending about 2 hours per leg doing the finishing forming with a
>rasp then sanding. I am looking to be able to do these legs in a lot
>less time. I am currently working on 2 end tables with spiral legs
>right now. So basically looking at 16 hours of work just to get these
>legs done. The bad part about the Router Crafter is you are stuck doing
>only one twist. You can't make them tighter or longer. plus you only
>have about 30 inches at max of twist.I will try and attach a photo of
>one of the sofa tables I done with the twist legs. It was made from
>American Chestnut. I got the wood from a old barn. As you well know
>American Chestnut has pretty much been extinct since the 30's. It is a
>beautiful wood but very brittle . Thanks guys for all the info you are
>giving me. I am trying to figure out if the cost of these machines is
>worth it as far as saving time and energy .
>
> 
>
>On Mon, Jan 22, 2018 at 4:06 PM, MWF <mwfos...@earthlink.net> wrote:
>
>Ira,
>That's the Z-Axis.  
>Many Mill users have this set-up.  They install a plunge router on the
>Y-Axis "gantry"/router mount plate and set the depth (Z-axis) by
>raising/lowering he plunge depth.
>Mac
>
>
>  _____  
>
>
>-----Original Message----- 
>From: Shannon Vest 
>
>Sent: Jan 22, 2018 2:11 PM 
>To: legacy-ornamental-mills@googlegroups.com 
>Subject: Re: New Members and Moderation 
>
> 
>
>On Mon, Jan 22, 2018 at 11:44 AM MWF <mwfos...@earthlink.net> wrote:
>
>Ira,
>
>There is an older version of a LOM 1000 in the Washington, DC area
>(Annandale, VA).
>Here is the link to it on CraigsList:
>
>https://washingtondc.craigslist.org/nva/tls/d/legacy-1000-woodworking/6438941195.html
>
>As others has conveyed - Welcome to The Group.
>Mac
>
>
>Mac thanks for the info on the 1000. One thing I noticed about it
>though is it doesn’t have the crank on top to raise and lower the
>router. I know that is considered a axis but not sure if it is x , y ,
>or z.  Is that something I need or is that something I can do without?
>Thanks Ira
>
>-----Original Message----- 
>From: Shannon Vest 
>Sent: Jan 22, 2018 6:31 AM 
>To: legacy-ornamental-mills@googlegroups.com 
>Subject: Re: New Members and Moderation 
>
>Yeah I saw that one. I live in eastern Ky so that would be a little to
>far of a road trip to do. I've looked at all of them on eBay. Thanks
>for looking for me though.                                             
>                                                                    Ira
>
> 
>
>On Sun, Jan 21, 2018 at 8:58 PM, Bill Bulkeley <bulke...@mmnet.com.au>
>wrote:
>
>You saw this 1200 for sale right?
>
>https://www.ebay.com/itm/Legacy-1200-Woodworking-Ornamental-Mill-with-Router/152843483615?hash=item23962e79df:g:JRgAAOSwSRpZsbaF
>
> 
>
>Bill
>
>From: legacy-ornamental-mills@googlegroups.com
>[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Ira S.
>Vest
>Sent: Monday, 22 January 2018 8:51 AM
>To: Legacy Ornamental Mills
>Subject: Re: New Members and Moderation
>
> 
>
>Hi I'm Ira.I have been doing woodwork for going on 15 years now.  I
>have been considering buying a Legacy Mill. I'm not real good with
>computers so not really thinking a cnc is for me. The Legacy 1200 is
>what I'm really looking for but so far have only found a 900 for sale.
>It is however missing a few parts. It's missing a hand wheel, and
>slides that go in the rails. I have never been around or even seen one
>of the mills in person only on the computer and youtube. I can get the
>900 for a really good deal. I figure this will get my feet wet so to
>speak then in the future maybe find a 1200 to buy. Any info or warnings
>would be greatly appreciated considering my ignorance with these
>machines. I mainly build furniture and cabinets but would like to also
>have the option to go with columns if I decide to. Thanks for any and
>all help.                                                              
>                                          Ira S. Vest
>
>On Saturday, March 31, 2012 at 8:07:09 PM UTC-4, Tim wrote:
>
>Hello New Members, 
>
> 
>
>This is a reminder that until you post a message, your messages must be
>approved by either an owner or moderators of this group to be posted. 
>Google sends an automated message to the people that are responsible
>for approving messages, but please be aware it can be a very long
>delay.   
>
> 
>
>Getting off the moderated list is easy as posting a message introducing
>yourself.  Asking a question related to the equipment or posting a
>photo is always good for getting instant approval.  I still believe
>this is a family friendly place so please don't be shy.  
>
> 
>
>As of today, there are 63 members that have joined since 2010 that have
>never posted a message.  I sure would like to hear from them either
>here in this thread, or feel free to send me a note off the list so I
>can update your status.  
>
> 
>
>-Tim
>
>-- 
>You received this message because you are subscribed to a topic in the
>Google Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this topic, visit
>https://groups.google.com/d/topic/legacy-ornamental-mills/lmVeoLm7Tr0/unsubscribe.
>To unsubscribe from this group and all its topics, send an email to
>legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To post to this group, send email to
>legacy-ornamental-mills@googlegroups.com.
>Visit this group at
>https://groups.google.com/group/legacy-ornamental-mills.
>For more options, visit https://groups.google.com/d/optout.
>
> 
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To post to this group, send email to
>legacy-ornamental-mills@googlegroups.com.
>Visit this group at
>https://groups.google.com/group/legacy-ornamental-mills.
>For more options, visit https://groups.google.com/d/optout.
>
> 
>
>
><http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
>
>
>Virus-free. 
><http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
>www.avg.com 
>
> 
>
>-- 
>You received this message because you are subscribed to a topic in the
>Google Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this topic, visit
>https://groups.google.com/d/topic/legacy-ornamental-mills/lmVeoLm7Tr0/unsubscribe.
>To unsubscribe from this group and all its topics, send an email to
>legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To post to this group, send email to
>legacy-ornamental-mills@googlegroups.com.
>Visit this group at
>https://groups.google.com/group/legacy-ornamental-mills.
>For more options, visit https://groups.google.com/d/optout.
>
> 
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To post to this group, send email to
>legacy-ornamental-mills@googlegroups.com.
>Visit this group at
>https://groups.google.com/group/legacy-ornamental-mills.
>For more options, visit https://groups.google.com/d/optout.
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To post to this group, send email to
>legacy-ornamental-mills@googlegroups.com.
>Visit this group at
>https://groups.google.com/group/legacy-ornamental-mills.
>For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Reply via email to