Hi I have several questions I was wondering if you would be kind enough to answer. 1) What size motors are you using? (Nema 23, 31) 2) Are they stepper motors? 3)What is the voltage that you are using? 4) Are you using the atlas screws that came with the Legacy or have you replaced them with something else?
Thank you. Harvey On Sunday, March 1, 2020 at 3:15:05 PM UTC-6, gearhed1971 wrote: > > Finally have my 900 Legacy OM with Avid cnc control running and making > parts. Runs on mach 4 with ethernet smoothstepper, programs made in vcarve > pro. I import stl files, apply tool paths and run. I set it up with pepprl > and fuchs proximity sensors also, and added a 3 inch drag chain for cable > management. I originally thought that I would have issues with the machine > wiggling, but the bracketry for the drag chain took alot out. I may > eventually manufacture a tailstock that holds a live center, but the dead > center is ok for now. > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/a7ec6dcb-aac2-4448-acf7-7806a459cd33%40googlegroups.com.
