Thank you for the information, I was not sure if 23's would work. My problem is the controller I have uses 24 to 36 volts. At least now I may try to connect the steppers to the screws to see what happens.
On Sun, Mar 1, 2020 at 5:06 PM IAN <[email protected]> wrote: > They are Nema 23 stepper motors with 48 volt power supply. I used the > original screws that came on the machine and tuned the steps to them. Here > is the box I used - > http://www.cncrouterparts.com/plug-and-play-nema-23-cnc-control-system-p-260.html > > > > > Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for > Windows 10 > > > > *From: *Harvey <[email protected]> > *Sent: *Sunday, March 1, 2020 5:55 PM > *To: *Legacy Ornamental Mills <[email protected]> > *Subject: *Re: Legacy 900 cnc build > > > > Hi > > > > I have several questions I was wondering if you would be kind enough to > answer. > > 1) What size motors are you using? (Nema 23, 31) > > 2) Are they stepper motors? > > 3)What is the voltage that you are using? > > 4) Are you using the atlas screws that came with the Legacy or have you > replaced them with something else? > > > > Thank you. > > > > Harvey > > > > > > On Sunday, March 1, 2020 at 3:15:05 PM UTC-6, gearhed1971 wrote: > > Finally have my 900 Legacy OM with Avid cnc control running and making > parts. Runs on mach 4 with ethernet smoothstepper, programs made in vcarve > pro. I import stl files, apply tool paths and run. I set it up with pepprl > and fuchs proximity sensors also, and added a 3 inch drag chain for cable > management. I originally thought that I would have issues with the machine > wiggling, but the bracketry for the drag chain took alot out. I may > eventually manufacture a tailstock that holds a live center, but the dead > center is ok for now. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/a7ec6dcb-aac2-4448-acf7-7806a459cd33%40googlegroups.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/a7ec6dcb-aac2-4448-acf7-7806a459cd33%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/5e5c3fe0.1c69fb81.19a69.1472SMTPIN_ADDED_MISSING%40gmr-mx.google.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/5e5c3fe0.1c69fb81.19a69.1472SMTPIN_ADDED_MISSING%40gmr-mx.google.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CADbgprXnpcLmb_faFFS09Hb0kdBst7Lf6b861vhZHTHK3gjM8Q%40mail.gmail.com.
