Hey Mac, I did not realize you knew him too. I talk to him fairly frequently as we have become pretty good friends over the last few years. I tap on him for advice on equipment purchases from time to time as well. Actually his wife worked at the same company I did as well. so pretty cool Michael K. know's him pretty well too and has done several shows that Rollie has been too. Rollie also is the head of our WoodWorking group located out of the St Cloud area. Small world. I'll have to mention your name Mac and let him know about how I come to know you. anyway have a great night. going to get some zzzzz's
Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Feb 21, 2021 at 9:16 PM M.W.Foscue <mwfos...@earthlink.net> wrote: > And Rollie is one of the "Seminar Presenters" at "The Woodworking > Shows". The traveling ones - that used to start the first weekend in Jan > and run for about 4 months. That's going to start out a LOT different this > year - with there being on-line sessions for 3 or 4 weekends starting in > March(?). > Really enjoyed his sessions! > I'm curious how the "Vendors & Demonstrators" are going to do their > thing. I have bought something at every one of the Shows that come to my > area. In fact myself and others always look forward to seeing demos of > "stuff" we have read about over the previous 12 months - and hold of on > pulling the trigger on them until we see them demonstrated at The Show! > Hard to replace the eyeball to eyeball and hold in your hand experiences > when it comes to buying tools! > Mac > ------------------------------ > > -----Original Message----- > From: Tim Ziegler > Sent: Feb 21, 2021 9:42 PM > To: legacy-ornamental-mills@googlegroups.com > Subject: Re: Looking for some new projects. > > Hey on another note do you happen to know or have you ever met Rollie > Johnson, contributing Editor to "Fine Woodworking"? > He travels and does a lot of teaching and training. He actually lives out > about 45 minutes from me here in Minnesota. > > Kind Regards, > > Timothy J. Ziegler > ------------------------------ > On Sun, Feb 21, 2021 at 8:34 PM anthony <acmepi...@gmail.com> wrote: > >> I teach woodturning classes. The one I did today is local. >> I traveled around some and did demos and hands on classes at clubs or >> symposia. I use the past tense as the covid has made that difficult for >> the >> last year. I will probably start again as it gets better, but using Zoom >> may have some effect on that. >> ------------------------------ >> -----Original Message----- >> From: Tim Ziegler >> Sent: Sunday, February 21, 2021 8:13 PM >> To: legacy-ornamental-mills@googlegroups.com >> Subject: Re: Looking for some new projects. >> >> Thanks for sharing that Anthony. >> I find that very interesting and appreciate your attention >> to detail. >> >> You come across as a true craftsman. >> I can also tell you are passionate about your turnings. >> Are you teaching woodworking classes? Just curious and >> you don't have to answer if you wish not too. >> >> Kind Regards, >> >> Timothy J. Ziegler >> ------------------------------ >> On Sun, Feb 21, 2021 at 5:31 PM anthony <acmepi...@gmail.com> wrote: >> Here are some pictures of a cup chuck that I am using to make boxes like I >> showed images of earlier. >> It must be sized correctly to the piece being held, and the inside leading >> edge has to be crisp and within a degree or two of 90. >> If the chuck is correct, you can do most eliptical work in it. >> ------------------------------ >> -----Original Message----- >> From: Tim Ziegler >> Sent: Saturday, February 20, 2021 8:31 PM >> To: legacy-ornamental-mills@googlegroups.com >> Subject: Re: Looking for some new projects. >> >> Hey Anthony, >> >> Any time you reference something like this chuck your talking about can >> you >> download a pix or two? >> Just be curious to see some of these items. Possibly others would be >> interested too? >> >> Kind Regards, >> >> Timothy J. Ziegler >> ------------------------------ >> On Sat, Feb 20, 2021 at 11:22 AM anthony <acmepi...@gmail.com> wrote: >> A cup chuck. The important part of the cup chuck is shaped like the >> inside >> of a coffee cup with the rim being very crisp and of a diameter just >> slightly smaller than the major diameter of the sphere and friction holds >> the sphere in place while you work it. The sphere can be placed in the >> cup >> chuck at any orientation to permit access to its entire surface. To make >> the box, all of the work on the sphere is done in the cup chuck except the >> initial step of turning the stock from square to approximate sphere. >> The internal box, that piece that comes out of the sphere, is turned >> mostly >> in a regular four-jawed chuck with one step done in a jam chuck. >> >> anthony >> ------------------------------ >> -----Original Message----- >> From: Tim Ziegler >> Sent: Saturday, February 20, 2021 5:47 AM >> To: legacy-ornamental-mills@googlegroups.com >> Subject: Re: Looking for some new projects. >> >> them are pretty cool. What method are you using to turn the circles on the >> completed Ball type turning? >> >> Kind Regards, >> >> Timothy J. Ziegler >> ------------------------------ >> On Fri, Feb 19, 2021 at 11:51 PM anthony <acmepi...@gmail.com> wrote: >> I attached an image of the barley twist and a series of photos of a style >> of >> box I have been making lately. >> One of the difficulties with the twist is that the travel may not be >> constant throughout its length. I have only the two examples, and it is >> difficult to be certain what is happening. >> anthony >> ------------------------------ >> From: 'Curt George' via Legacy Ornamental Mills >> Sent: Thursday, February 18, 2021 12:42 AM >> To: legacy-ornamental-mills@googlegroups.com >> Subject: Re: Looking for some new projects. >> >> Sorry I did not see your reply to the bone question. >> >> Do not boil your bone. a hot water bath will not hurt the bone, but >> boiling >> will weaken the bone. >> >> Hydrant peroxide a 2-3% will remove the oil and whiten up the bone, if >> left >> to soak in it for a week or two. >> >> here are some pix. of some of my turnings. >> C.A.G. >> ------------------------------ >> On Thursday, February 18, 2021, 01:19:55 AM EST, anthony >> <acmepi...@gmail.com> wrote: >> >> I bought the femur at >> >> Atlantic Coral Enterprise, Inc. >> 5000 Crescent Technical Court >> St. Augustine, FL 32086 >> Outside FL: 1-800-624-7964 >> Inside FL: 904-797-7478 >> >> I have never glued bone before. I guess that you might need to boil it >> first. Most of the bone I have worked with has a fair amount of oil in >> it. >> I have had some boiled bone, it seems leached of oil, but I have never >> turned it. >> >> I am primarily a turner. I have turned lots of things, but lately been >> making boxes for fun and balusters and similar things for money. >> >> anthony >> ------------------------------ >> From: 'Curt George' via Legacy Ornamental Mills >> Sent: Wednesday, February 17, 2021 7:26 AM >> To: legacy-ornamental-mills@googlegroups.com >> Subject: Re: Looking for some new projects. >> >> Very Nice Anthony! >> >> Awesome wand. >> >> Where did you find A Giraffe femur? >> >> What I have been doing is cutting bone disks out of Cow bones, and then >> gluing the disks into a solid blanks for my turnings. sorta like making >> bone >> Plywood. It take more time to make the blank then it dose to turn it. But >> the results are very nice. >> Please let us know more about what you are doing. >> >> C.A.G. >> ------------------------------ >> On Wednesday, February 17, 2021, 08:10:53 AM EST, anthony >> <acmepi...@gmail.com> wrote: >> >> I read that you were considering turning some bone. >> I have turned a couple of kinds of bone, this wand is made of Giraffe >> femur. >> It is the densest bone, and has the largest cross section that I have >> used. >> The other materials are Blackwood, Bocote, Pink Ivory, Boxwood, Verawood, >> Satine, and Osage Orange. >> I call it the Eveready Swiss Army Utility Wand. Had to get the magical >> batteries, the small pieces that screw into the base of the handle, by >> seagull, the owls can't fly across the Atlantic, from the Eveready shop in >> Diagon Alley. The toothpick was necessary to quality for Swiss Army. >> anthony >> ------------------------------ >> -----Original Message----- >> From: 'Curt George' via Legacy Ornamental Mills >> Sent: Sunday, February 14, 2021 8:20 PM >> To: Legacy ornamental mills >> Subject: Looking for some new projects. >> >> HI everyone. >> >> I hope everyone is well? >> >> Its COLD in my shop, So I spent most of my day staying inside. I've been >> looking for projects to play with on the Legacy and or my Lathe. On the >> internet today. >> >> I want to do some more bone turning, I have already cut out a number of >> bone >> disks, I am looking forward to gluing them up into something that I can >> turn, soon. >> The problem is What should I make? >> I don't like pen's! >> I have already made a number of magnify glass's and other kits type of >> projects. >> >> I have gone to a number of dollar stores and hardware and thrift stores, >> looking for cheaply made things that can be re-worked. but so far no luck >> finding anything new. >> So I thought I would ask you all. Dose anyone know of a nice projects, >> that >> you like to make? Family heirloom type of stuff. Perhaps a letter opener? >> or ??? >> >> Any and all ideas are welcome. >> >> Looking forward to talking to you all more. >> >> Have a good night. >> >> C.A.G. >> > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/1129243988.6284.1613963817167%40wamui-dingo.atl.sa.earthlink.net > <https://groups.google.com/d/msgid/legacy-ornamental-mills/1129243988.6284.1613963817167%40wamui-dingo.atl.sa.earthlink.net?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLE3gCC3Bofv61wp05E0MtQp%2Bqs9X_J%2Bnk7T72Okyy_hZQ%40mail.gmail.com.
