There you go. Good place for caned goods & washer and dryer too.
On Wed, Feb 17, 2021, 7:04 AM Michael Kratky <krat...@roadrunner.com> wrote: > Basements are great for seasoning and storing wood as long as the wife > doesn’t mind sharing the same space with her wardrobe; most weekend > woodworkers/turners have their shops there here in the northeast not > something I recommend due to the noise and dust but any shop is better than > no shop especially when it’s a consistent 60-68°F. > > > > > > Michael Kratky > > Electrical Fire Underwriter Inspector and Consultant > > Commonwealth Electrical Inspection Services, Inc > > NY State Greater Capital District-Adirondack Regions > > 119 Riverview Road > > Northville, NY 12134 > > theinspect...@roadrunner.com > > (518) 863-8800 ofc > > (518) 207-7247 mobile > > > > > > > > *From:* legacy-ornamental-mills@googlegroups.com [mailto: > legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Tim Ziegler > *Sent:* Wednesday, February 17, 2021 6:54 AM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: Looking for some new projects. > > > > Hey we had a heat wave here the temp only got down to -17 below. lol > > Basements are great. about 90 percent of them have basements in minn. > > We have tile around our newer addition and the older part has a stone & > morter, topped with a > > couple courses of block. All the older part from the 40's. Not finished in > old part. We do have > > a few streams coming through the old basement and it goes right to the > floor drain. > > The new part we have a sump pump that the tiles drain into. > > Basements are great. But some times the single level would be better. We > have 3 floors. > > upstairs, main level and Basement. > > Anyways a bit of the topic but .... > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > > > On Wed, Feb 17, 2021 at 12:25 AM M.W.Foscue <mwfos...@earthlink.net> > wrote: > > Curtis - Where do you live that it is -12ºF?! > > > > Tim and others: In Ely, Minnie-soda it is (at this moment) -22ºF - and in > Fairbanks Alaska it is a "balmy" +10ºF for comparison! > > Moral here? Move to Fairbanks! LoL > > > > Yes - basements are GREAT - provided the water table allows them. Like > you said - very moderate/stable temperature year round. > > Mac > ------------------------------ > > -----Original Message----- > From: 'Curt George' via Legacy Ornamental Mills > Sent: Feb 17, 2021 12:46 AM > To: "legacy-ornamental-mills@googlegroups.com" > Subject: Re: Looking for some new projects. > > Hello again everyone, this topic has taken off... > > > > First with Bill's heat. I suggested a few years back, when he was > re-building his house and workshop, to earth berm his house and perhaps > even dig a basement. > > he said that this kind of things just were not done over there. Earth is > an good insulator for both hot and cold. > > > > As for me, I have a two car detached un-heated work shop, I use a radiant > Kerosene heater. > https://www.amazon.com/REMINGTON-REM-80-OFR-Radiant-Heating-Square/dp/B07GF9JQ1F > I > very much like my heater. its not as cheap as it once was to use, but this > heater is quite and heats the shop nicely when I am working out there. I > normally go through appx. 50 gal per winter. > > For me digging another basement and earth breaming my place just isn't as > easy in a city environment. ;-( But perhaps... anything can be made > possible. ;-) > > > > Take care everyone, It's -12 F* out tonight. Stay worm. > > > > C.A.G. > ------------------------------ > > On Tuesday, February 16, 2021, 01:23:00 PM EST, Michael Kratky < > krat...@roadrunner.com> wrote: > > > > Hello Timothy, > > > > Like anything in this world we are constantly repairing or upgrading, 4 > days ago it was the blower motor on the pellet stove, yesterday it was > replacing the belts on the snow thrower, today it’s a leaky hydraulic ram > on the tractor loader. > > > > Can’t say enough good things about the LP gas Rinnai EX 38CWP wall heater, > super efficient, dependable, care free, has 2 washable stainless steel mesh > filters, a water reservoir to add necessary humidity, easy installation, > only complaint is they keep increasing in cost my 1st one 5 years ago was > $1200 now their close to $2200; actually have 3 of them between my 2nd > house, my wife’s art studio and the shop. > > > > Apparently you sent your Minnesota weather to my brother in Texas, here in > Northville, NY its 36° freezing rain with a big snow storm on its way in 2 > days. > > > > Michael > ------------------------------ > > *From:* legacy-ornamental-mills@googlegroups.com [mailto: > legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Tim Ziegler > *Sent:* Tuesday, February 16, 2021 12:04 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: Looking for some new projects. > > > > Hey Michael, > > thanks for replying back. Always interesting to hear what others are > using. > > Have you ever had to put in any parts? Sounds like it works pretty well > for you. > > Tell me a little more about the wall unit you're using? > > > > You're very welcome on the weather. I never like to keep things for myself > and my Mom taught me to share especially > > gifts like a long winded Polar Vortex. lol. Sounds like by the weekend we > may be out of the basement for a while. > > > > Kind Regards, > > > > Timothy J. Ziegler > ------------------------------ > > On Tue, Feb 16, 2021 at 10:27 AM Michael Kratky <krat...@roadrunner.com> > wrote: > > Hi Timothy, > > > > It’s an American Harvest about 12 years old designed to burn most anything > (but not coal), have burned corn and even cherry pits in it but now just > wood pellets as that’s all I can find; cost me about $7.50/day to heat my > 2400 sq ft home at a comfortable 70°F during the coldest times January, > February, and March. > > > > 1200 sq ft shop is a super efficient Rinnai EX 38CWP propane wall furnace > that cost me only about $2/day to heat at a constant 60°F. > > > > Thanks for send you weather my way, > > > > Michael Kratky > ------------------------------ > > *From:* legacy-ornamental-mills@googlegroups.com [mailto: > legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Tim Ziegler > *Sent:* Monday, February 15, 2021 10:08 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: Looking for some new projects. > > > > yup what brand you Michael? > > > Kind Regards, > > > > Timothy J. Ziegler > ------------------------------ > > On Mon, Feb 15, 2021 at 7:50 AM Michael Kratky <krat...@roadrunner.com> > wrote: > > LOL, what country we even burn food here for energy; I actually have a > heating stove that’s designed to burn corn. > > > > Michael > ------------------------------ > > *From:* legacy-ornamental-mills@googlegroups.com [mailto: > legacy-ornamental-mills@googlegroups.com] *On Behalf Of * > bulke...@mmnet.com.au > *Sent:* Monday, February 15, 2021 8:13 AM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* RE: Looking for some new projects. > > > > Yep I will go along with that. Now please forgive my ignorance but what is > a corn boiler > > > > Here a boiler is a pot we cook food in like lobster or yabbies in, is it > some sort of large heater over there? > > > > Bill > ------------------------------ > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler > *Sent:* Monday, 15 February 2021 10:48 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: Looking for some new projects. > > > > Lets just meet in the middle and I think we'd all be happier Bill. > > Kind Regards, > > > > Timothy J. Ziegler > ------------------------------ > > On Mon, Feb 15, 2021 at 1:24 AM <bulke...@mmnet.com.au> wrote: > > I’ll trade you guys for a bit of that cold its 90 ºF here today > > > > Bill > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue > *Sent:* Monday, 15 February 2021 3:48 PM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: Looking for some new projects. > > > > Tim, > > I think I heard on the radio that Ely hit minus 50ºF yesterday or the day > before! > > I believe they said it was a record low temp for that date. > > It ought to be very safe for you to go out ice fishing this coming week. > > Stay warm. > > Mac > ------------------------------ > ------------------------------ > > -----Original Message----- > From: Tim Ziegler > Sent: Feb 14, 2021 10:00 PM > To: legacy-ornamental-mills@googlegroups.com > Subject: Re: Looking for some new projects. > > Hey Harvey hope all is well good to see your still following. > > Suppose to hit 30 below here tonight. wow what a long cold snap. > > > Kind Regards, > > > > Timothy J. Ziegler > ------------------------------ > > On Sun, Feb 14, 2021 at 8:30 PM Harvey Matyas <hmatyas0...@gmail.com> > wrote: > > Hi Curt > > > > You already probably know about this guy but here goes. > > > > Projects Archives | Turning for Profit | Woodturning | Lathe | > <https://www.turningforprofit.com/plans/> > > > > He has like a user group where he periodically sends out emails that have > projects in them. > > > > I hope this helps, keep warm. > > > > Harvey > ------------------------------ > > On Sun, Feb 14, 2021 at 8:21 PM 'Curt George' via Legacy Ornamental Mills < > legacy-ornamental-mills@googlegroups.com> wrote: > > HI everyone. > > > > I hope everyone is well? > > > > Its COLD in my shop, So I spent most of my day staying inside. I've been > > looking for projects to play with on the Legacy and or my Lathe. On the > internet today. > > > > I want to do some more bone turning, I have already cut out a number of > bone disks, I am looking forward to gluing them up into something that I > can turn, soon. > > The problem is What should I make? > > I don't like pen's! > > I have already made a number of magnify glass's and other kits type of > projects. > > > > I have gone to a number of dollar stores and hardware and thrift stores, > looking for cheaply made things that can be re-worked. but so far no luck > finding anything new. > > So I thought I would ask you all. Dose anyone know of a nice projects, > that you like to make? Family heirloom type of stuff. Perhaps a letter > opener? or ??? > > > > Any and all ideas are welcome. > > > > Looking forward to talking to you all more. > > > > Have a good night. > > > > C.A.G. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/1268494685.8665.1613543155023%40wamui-gaston.atl.sa.earthlink.net > <https://groups.google.com/d/msgid/legacy-ornamental-mills/1268494685.8665.1613543155023%40wamui-gaston.atl.sa.earthlink.net?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFq7B6QOaeZ_oNxY47_ck_y1QCwkQTQOgV5DUiJykhbsA%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFq7B6QOaeZ_oNxY47_ck_y1QCwkQTQOgV5DUiJykhbsA%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/002a01d7052d%24763d3930%2462b7ab90%24%40com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/002a01d7052d%24763d3930%2462b7ab90%24%40com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH0TmBww_h-%2B2GQUAuuniLTcK5FjLyNK1%3D_MoqfoSExqw%40mail.gmail.com.
