Now before you ask Dan the bits to use are
https://www.magnate.net/ProductDetails.asp?ProductCode=756 for large internal threads (remove the bearing ) and this one https://www.magnate.net/SearchResults.asp?Cat=230811 for fine threads, small hole and short depth internal threads and for external threads https://www.magnate.net/ProductDetails.asp?ProductCode=706 wooden threads were traditionally 90 degrees for more strength and less chipping at the point of the thread instead of the metal 60 or 55 degrees. And always choose a wood that is not prone too chipping. Bill From: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of Dan Krager Sent: Tuesday, 23 August 2022 8:32 AM To: Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com> Subject: Rose Engine for Jet wood lathe Has anyone seen or experienced this item <http://bicitywoodturners.com/newsletters/articles/Rose_Engine.pdf> ? I stumbled into it looking at how to machine wood threads on the REVO and was amazed. In short, it's a rose engine that bolts directly to a Jet 1014 standard lathe and offers almost all the capabilities of the rose engine lathe of antiquity. For those wearing hip boots and waders in this OM business, this seems like the cat's meow. I'm not deep into extensive ornamental turning as it is a very specialty item that takes a lot of time, but for those with creative energy to burn, this would be a fun specialty. BTW, haven't found internal or external threading discussions yet.... DanK -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> . To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/9bb3d8ae-2cf1-4115-94dd-9fd555f997aen%40googlegroups.com <https://groups.google.com/d/msgid/legacy-ornamental-mills/9bb3d8ae-2cf1-4115-94dd-9fd555f997aen%40googlegroups.com?utm_medium=email&utm_source=footer> . -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/001301d8b682%24ed77ba40%24c8672ec0%24%40mmnet.com.au.
