Looks pretty cool though Curt, Maybe on my next bone turning I should try that. don't look like you had too much movement?
Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Aug 28, 2022 at 1:16 PM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Hello again everyone. > > Its not 100% done but here is today's bone "Diamond Pattern" also called > Checkering. > > This simple pattern is a very real pain. 12 starts right handed and then > reversed 12 left. > 4" pitch. Using a V bit at a 1/16" depth of cut/plunge . > > My nerves are shot after doing this one. I found myself holding my breath > a number of time > while cutting. > > Im going back out to the shop now and make some sawdust. this one is to > much like work for me > to do on a Sunday. ;-p > > Have a great day everyone. > more latter. > > C.A.G. > > On Saturday, August 27, 2022 at 01:17:49 AM EDT, Curt George < > curt.geo...@yahoo.com> wrote: > > > :-) > > C.A.G. > > On Friday, August 26, 2022 at 09:26:45 PM EDT, Tim Ziegler < > timjzieg...@gmail.com> wrote: > > > Thanks Curt, there was some interesting processes explained this time. > So basically you flatten the run the hole saw through again. Now I'm > liking this process more. > see I run the disc with out the hole then drill the hole after I > flatten them. More accurate but much slower. > Now I will see how that goes for me, Sunday. > Out all day tomorrow at a Craft Fair selling lasered goods. > Thanks again for additional and much needed details. > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > [image: width=] > <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> > Virus-free.www.avg.com > <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> > <#m_6639958740546007732_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> > > On Fri, Aug 26, 2022 at 10:38 AM 'Curt George' via Legacy Ornamental Mills > <legacy-ornamental-mills@googlegroups.com> wrote: > > Hello Again Tim. > > The beauty of this jig. is you can drill any size hole, Most pen turning > kits use some type of brass rod, you can use your collet chuck and drill > out any size hole you need, then putting a dowel or another rod in the V > block will make sure everything is set properly for what ever size disk you > want to make. > I do like the barrel trimer inside the diamond hole saw, it speeds things > up greatly for me. > What I do it drill/flatten with the barrel trimmer, one side of the bone > disk only, and then drill out the disk all together with another hole saw > of the same size as the barrel trimer, the sanding will flatten the other > side, > this method gives me a thickest disk possible (form the bone I'm cutting.) > One side is flat, (giving me a flat to put against the V block.) Sanding > takes seconds to do, Bone sands so quickly its scary, compared to the way > it cuts. (which is MUCH slower.) > > I have to get to work now. > > Have a good day. (I will be back at "O"Dark hundred/ Midnight. ) ;-) > > C.A.G. > > On Friday, August 26, 2022 at 11:04:27 AM EDT, Tim Ziegler < > timjzieg...@gmail.com> wrote: > > > send and end view of your V block with the rod in position and with a disc > attached. > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Fri, Aug 26, 2022 at 9:29 AM 'Curt George' via Legacy Ornamental Mills < > legacy-ornamental-mills@googlegroups.com> wrote: > > Tim here are some photo of my bone salvage. Every one of these bones > could not be used before, but today I can use them... ;-) > > Happy Days! > > C.A.G. > > On Friday, August 26, 2022 at 09:37:06 AM EDT, 'Curt George' via Legacy > Ornamental Mills <legacy-ornamental-mills@googlegroups.com> wrote: > > > Tim the method is the rod in the V block. > The hole I drill into the disk is the same as the rod (its a snug fit ). > by putting the disk over the rod, and then moving the block to the sanding > disk ,The bone disk is in-between the two flat surfaces. sand, turn the > disk 90 deg. and check to make sure the disk in flat, then inspect the hole > disk for any flaws, Re-sand if nessasary, or put the sanded disk in the jar > for glue up. > The hole process only takes a few sec. per disk. WAY faster then the old > method. > > I hope this helps? > talk to you more latter. > > C.A.G. > > On Friday, August 26, 2022 at 06:38:17 AM EDT, Tim Ziegler < > timjzieg...@gmail.com> wrote: > > > Thanks Curt, > that does look like a reasonable price, I am ordering a set also for > drilling in dowels and mounted in a stand will > be a great aid in cutting rounds on the Chopsaw. > I still don't see your method of holding the disc in place when sanding? > Am I missing something? > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Thu, Aug 25, 2022 at 11:47 PM 'Curt George' via Legacy Ornamental Mills > <legacy-ornamental-mills@googlegroups.com> wrote: > > > https://www.amazon.com/VB-1-Capacity-Block-Clamp-Pair/dp/B000P49854/ref=sr_1_4?crid=14ELB20T0XU8X&keywords=machinist+vee+blocks&qid=1661488982&sprefix=Vee+block%2Caps%2C94&sr=8-4 > > Its called a machinist V block. I bought mine back in the 80's but Amazon > sells then at a fair price. > > C.A.G. > > On Thursday, August 25, 2022 at 05:09:11 PM EDT, Tim Ziegler < > timjzieg...@gmail.com> wrote: > > > No what are you holding the Disc with when you put it up to your sander? > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Thu, Aug 25, 2022 at 8:18 AM 'Curt George' via Legacy Ornamental Mills < > legacy-ornamental-mills@googlegroups.com> wrote: > > Not the rod that I am sanding on, but Yes I do glue a brass rod in the > middle of my bone turnings, most of the time. > I did a bottle stopper and a few pull knobs where I did not glue a brass > rod on, But for most of the turnings that I have done, there is a brass rod > in the middle of them. > > C.A.G. > > On Thursday, August 25, 2022 at 04:50:35 AM EDT, Tim Ziegler < > timjzieg...@gmail.com> wrote: > > > So you're gluing it to the brass rod? > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Wed, Aug 24, 2022 at 11:16 PM 'Curt George' via Legacy Ornamental Mills > <legacy-ornamental-mills@googlegroups.com> wrote: > > Hey Tim. > > Can you be more clear, More pix? of which part? > Here is another photo of the sanding of my disks. > > What I did here is, I put a brass rod (the same as the ones I use on my > project.) In this Vee block. the brass rod is holding the disk, the back > side of the disk is flat on the steel Vee block. I clamped the straight > edges pieces of wood onto my table. using this as my guide to keep the disk > and the sanding plate square to each other. > I sand the disk flat, and then turn 90 deg. and kiss the disk again to > make sure the bone is flat and true to the Vee block. > Sanding bone is very quick, although somewhat messy/dusty. I weir my > raspier mask when sanding. > On the good side of things, using this method, lets me use small/thinner > bone disks that I would have throw away using my earlier methods. > (basically due to there being no way I could hold the very thin bone disk > in a chuck to face off .) > > I hope this helps answer some of the questions? > > Have a good night. > > C.A.G. > > On Wednesday, August 24, 2022 at 10:36:01 AM EDT, Tim Ziegler < > timjzieg...@gmail.com> wrote: > > > You might have to share some pix of that Curt. As you know my process is > super accurate but extremely labor intense. > More later > > Tim > > On Wed, Aug 24, 2022, 9:11 AM 'Curt George' via Legacy Ornamental Mills < > legacy-ornamental-mills@googlegroups.com> wrote: > > Hello Tim > > As I make more the time is getting much better. > I've been using a new method of trueing up the bone, I am sanding the bone > on a holder to get them fat and true to each other. All three method that > I've used in the past work, but this new way is more precise then the first > way I sanded the disks, and much faster the using the steel lathe. > > C.A.G. > > > > On Wednesday, August 24, 2022 at 06:41:55 AM EDT, Tim Ziegler < > timjzieg...@gmail.com> wrote: > > > Yeah its got good color for sure. > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > > On Wed, Aug 24, 2022 at 3:31 AM <bulke...@mmnet.com.au> wrote: > > Very nice curt very uniform color this time > > > > Bill > > > > *From:* 'Curt George' via Legacy Ornamental Mills < > legacy-ornamental-mills@googlegroups.com> > *Sent:* Wednesday, 24 August 2022 3:34 PM > *To:* 'Curt George' via Legacy Ornamental Mills < > legacy-ornamental-mills@googlegroups.com> > *Subject:* Re: New bone turning projects > > > > Here is a better photo. > > > > C.A.G. > > > > On Wednesday, August 24, 2022 at 12:02:20 AM EDT, 'Curt George' via Legacy > Ornamental Mills <legacy-ornamental-mills@googlegroups.com> wrote: > > > > > > I got some free time to finish this glass/bone handle off tonight. > > > > C.A.G. > > > > On Tuesday, August 23, 2022 at 05:53:06 PM EDT, Tim Ziegler < > timjzieg...@gmail.com> wrote: > > > > > > I suppose once I quit trying to run 2 business's maybe I'll have more free > time lol. > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > > > On Tue, Aug 23, 2022 at 1:29 PM <bulke...@mmnet.com.au> wrote: > > Curt has been doing it longer your turn will come Tim, both of you > together have more projects done than me lol > > > > Bill > > > > > > *From:* legacy-ornamental-mills@googlegroups.com < > legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler > *Sent:* Wednesday, 24 August 2022 1:45 AM > *To:* legacy-ornamental-mills@googlegroups.com > *Subject:* Re: New bone turning projects > > > > Curt seems to get the most projects done. I only play and don't have but a > pile of spindles to show for it lol. > > > Kind Regards, > > > > Timothy J. Ziegler > > Ziegler WoodWork & Specialty > > 14171 160th Ave. > > Foreston MN 56330 > > > > 320-294-5798 shop > > 320-630-2243 cell > > > > > > On Tue, Aug 23, 2022 at 10:32 AM Okla Mike (Liltwisted) < > legacym...@iglide.net> wrote: > > I wondered why you were so quiet, You were a busy boy! Nice job! > > Mike OK > > On 8/23/2022 8:38 AM, 'Curt George' via Legacy Ornamental Mills wrote: > > I made these over this weekend. > > > > C.A.G. > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/1015230786.964120.1661261928845%40mail.yahoo.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/1015230786.964120.1661261928845%40mail.yahoo.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/2470f1f7-b510-95a9-475b-e1810524626a%40iglide.net > <https://groups.google.com/d/msgid/legacy-ornamental-mills/2470f1f7-b510-95a9-475b-e1810524626a%40iglide.net?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGFtYB2FH3tuiQ-sQCnFuR0r2zZapoansoj%2BfnPLaLRWw%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGFtYB2FH3tuiQ-sQCnFuR0r2zZapoansoj%2BfnPLaLRWw%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/001501d8b71e%243183e920%24948bbb60%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/001501d8b71e%243183e920%24948bbb60%24%40mmnet.com.au?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLG3Fro5NB3MDP84eG%3Dti6-NYFoEs6VOsEb1eb6zFwo2uQ%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLG3Fro5NB3MDP84eG%3Dti6-NYFoEs6VOsEb1eb6zFwo2uQ%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/1957758316.1199806.1661313731195%40mail.yahoo.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/1957758316.1199806.1661313731195%40mail.yahoo.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/1267169504.1203235.1661319250645%40mail.yahoo.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/1267169504.1203235.1661319250645%40mail.yahoo.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/000001d8b793%24e2ba8620%24a82f9260%24%40mmnet.com.au > <https://groups.google.com/d/msgid/legacy-ornamental-mills/000001d8b793%24e2ba8620%24a82f9260%24%40mmnet.com.au?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLG8zhVwcA_szAHP7_iWxRzw9z1h1f3jaiWDAXTyaNn0Ng%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLG8zhVwcA_szAHP7_iWxRzw9z1h1f3jaiWDAXTyaNn0Ng%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/457818022.1287929.1661350283271%40mail.yahoo.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/457818022.1287929.1661350283271%40mail.yahoo.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEu98GXSKQpcvr6OWTjVvdqh%2B3%3D74VaCyc3kOr0MMfLNQ%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEu98GXSKQpcvr6OWTjVvdqh%2B3%3D74VaCyc3kOr0MMfLNQ%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/309060526.1499447.1661400933612%40mail.yahoo.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/309060526.1499447.1661400933612%40mail.yahoo.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to a topic in the > Google Groups "Legacy Ornamental Mills" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/legacy-ornamental-mills/G_0i65tgILI/unsubscribe > . > To unsubscribe from this group and all its topics, send an email to > legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHjmBiiA_5ha-xwVs3-PibaTHKj3NffVefuAk%3D%3DfKxgAA%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHjmBiiA_5ha-xwVs3-PibaTHKj3NffVefuAk%3D%3DfKxgAA%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/450142045.1579237.1661433490990%40mail.yahoo.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/450142045.1579237.1661433490990%40mail.yahoo.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHtRQS-hJ%3DNEj1GDz%2BQSeHe79eNy%2BOe6C2VNv311P5cHQ%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHtRQS-hJ%3DNEj1GDz%2BQSeHe79eNy%2BOe6C2VNv311P5cHQ%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/816511589.50846.1661489240086%40mail.yahoo.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/816511589.50846.1661489240086%40mail.yahoo.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to a topic in the > Google Groups "Legacy Ornamental Mills" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/legacy-ornamental-mills/G_0i65tgILI/unsubscribe > . > To unsubscribe from this group and all its topics, send an email to > legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHDzXS7LYbkT87HuTGXgVst%2BXOaKc0z%2BQO2fj%2BrsGUCLg%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHDzXS7LYbkT87HuTGXgVst%2BXOaKc0z%2BQO2fj%2BrsGUCLg%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to a topic in the > Google Groups "Legacy Ornamental Mills" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/legacy-ornamental-mills/G_0i65tgILI/unsubscribe > . > To unsubscribe from this group and all its topics, send an email to > legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/1114278557.109520.1661521019546%40mail.yahoo.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/1114278557.109520.1661521019546%40mail.yahoo.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/1048359712.125315.1661524100884%40mail.yahoo.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/1048359712.125315.1661524100884%40mail.yahoo.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHo%3DdghQq7rR_M8ZY%2BxYaRVj%2BJUkXKFTg-2dj4KzX-O6g%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHo%3DdghQq7rR_M8ZY%2BxYaRVj%2BJUkXKFTg-2dj4KzX-O6g%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/976792316.155553.1661528308546%40mail.yahoo.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/976792316.155553.1661528308546%40mail.yahoo.com?utm_medium=email&utm_source=footer> > . > > > [image: width=] > <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> > Virus-free.www.avg.com > <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> > <#m_6639958740546007732_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> > > -- > You received this message because you are subscribed to a topic in the > Google Groups "Legacy Ornamental Mills" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/legacy-ornamental-mills/G_0i65tgILI/unsubscribe > . > To unsubscribe from this group and all its topics, send an email to > legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH7_Ob0yo4w2QqapSeFbhxp4OF8-dby-9uN6uX%2BbKhRVA%40mail.gmail.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLH7_Ob0yo4w2QqapSeFbhxp4OF8-dby-9uN6uX%2BbKhRVA%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/1721342875.496371.1661710536010%40mail.yahoo.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/1721342875.496371.1661710536010%40mail.yahoo.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHKK12Z-ZUDbr6mwn%2B6Q9OOyCiNDx%2BaGs3V%2BiPfvNeU_w%40mail.gmail.com.
