Welcome to the group Nathanial.
Kind Regards, Timothy J. Ziegler Ziegler WoodWork & Specialty 14171 160th Ave. Foreston MN 56330 320-294-5798 shop 320-630-2243 cell On Sun, Feb 12, 2023 at 12:23 AM 'Curt George' via Legacy Ornamental Mills < legacy-ornamental-mills@googlegroups.com> wrote: > Hello Nathaniel > > First off, Thank you. and Welcome to the group. > > The Legacy is a very good machine but there is a slight learning curve > that needs to be understood. > I recommend to "PLAY" with your machine a lot before trying to make > anything for real. > and to use "FREE" wood/ fire wood/scraps/tree clippings... Dont waist good > wood on play projects that most likely will not turn out. When I am testing > I try to use the same wood over and over, turning it down and then > re-working the wood until it can no long be used. > > The questions on the motors. The DC motor sold by Legacy is a 90v DC > motor, I believe it is a Dayton? The motor is a gear motor > ( I use a larger motor for my machine, I had to off-set the motor to use > it, where Legacy used a coupler and put the motor in line with the acme > screw.) , Max speed is something like 25-40 rpm, (I could be wrong on the > rpm? but it is slow.) The DC motor controller is 110ac/90 dc, variable > speed, and has a directional gear switch. Two limit switches. IN my book it > is a must have tool to make the Legacy work as it was meant to work. > The spindle motor dose not need to turn fast (90rpm max.) ON My Legacy > 1000ex I used a pulley and belt set-up. On my 200 I made a set of gears to > mate up with the motor. > 3 phase power is industrial standards, It is not needed to make the Legacy > work, but Use what you have/can. > I have modified all my tools in the hope to get the most out of them. I > highly recommend to try to make all your tool, uniformed, That is make the > set-up you use standardized, so you can switch form one machine to another > with out having to use a different set-up each time. It saves time and > really helps when things don't quite go as they should, (exp. sanding a > part where there was some tare out...) I have made a number of adaptors > that all use Legacy's hub drive set-up. (I think there drive hubs are the > best thing since sliced bread! I use them on ALL my machines including my > Shop Smith.) > Also (Last note) when turning multiple parts. use the assembly line > concept when possible. Do one thing on every part, and then move on. DO NOT > make one piece at a time, over and over like a CNC or an industrial machine > would do. This assembly line concept will make sure every part is the same. > > I am sorry for the delay of our postings today. I had to approve them > before the group could see them. You should not have any problems posting > to the group after today. > > I hope to talk to you more in the near future. > Have a good day. > > C.A.G. > > On Saturday, February 11, 2023 at 11:34:32 PM EST, Nathaniel Bacon < > natbac...@gmail.com> wrote: > > > Saturday February 11, 2023 > > To: Google Groups - Legacy Ornamental Mills > > I’m new to Legacy Mills, and this is my first post. I have been reading > many of the various posts and have gathered a lot of good, important and > useful information from them. I thank all of you. > > I’ve also watched the various Youtube.com videos and have learned a lot > from the oldest to the newest. > > Over the last two months, I have purchased two Legacy mills, one model > 1000 (used but in great condition with lots of gears and goodies) and one > model 1800 (a brand new 2004 model, still in its boxes). > > I'm in the process of putting together the 1800. The tip on the grooved > rails is a big help to make sure that I put the tool together correctly. > > On the Legacy model 1000, my first upgrade is replacing the plastic > bushings in the headstock and tailstock with steel ball bearings > assemblies. > > Even though I have some questions for Curt George, I encourage anyone to > voice their comments. > > Curt: > > Reference: YouTube.com video: *Spindle Drive Modification* (131) The > Spindle Drive Motor - YouTube > <https://www.youtube.com/watch?v=SXCC-EolhjQ>. > > I’m impressed and understand your video description and demo of the > spindle drive. > > I would like to incorporate this upgrade into my Legacy model 1000. > > Questions: > > On the DC drive motor, what brand, model, torque value and speed would you > recommend? > > On the motor controller what brand and size would be best? > > Would a reversible controller and motor have an advantage? > > Also, would a 3-phase motor work using a SMV frequency inverter controller > to adjust speed, direction? The SMV frequency controller takes 125±AC input > and converts it to 220±v 3-phase. This system allows for speed and > direction control. > > Curt: > > One a side note, I started collecting and using Shopsmith tools about 6 > years ago. I also noticed that you have Shopsmith tools in your shop. I > took note that you had successfully adapted Shopsmith parts to your legacy > – great job! > > I agree with your encouraging viewers to explore their imaginations > without limits. > > VR, > > Nathaniel Bacon > > Email: natba...@hotmail.com / natbac...@gmail.com > > Vacaville, California > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/fb3c4f56-81e5-4945-b784-377bf9796833n%40googlegroups.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/fb3c4f56-81e5-4945-b784-377bf9796833n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/871400521.290161.1676182980069%40mail.yahoo.com > <https://groups.google.com/d/msgid/legacy-ornamental-mills/871400521.290161.1676182980069%40mail.yahoo.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHMubZgQ7S4OkX-4mVWYbm3Je1vbDQt0CemHZcJniJw8Q%40mail.gmail.com.
