Thats an awesome idea. On Fri, Jul 21, 2023 at 8:54 AM Tim Ziegler <timjzieg...@gmail.com> wrote: > > So several months ago I made this adapter to allow me to attach > my LongWorth Chuck to my Rotary table to give me a better way to > hold projects then using double stick tape or holding blocks etc... > So recently I have a bowl on my lathe that decided to go it's separate way > during turning. Once I caught up to the bowl I realized the base where I > had dovetailed to fit the chuck, had broken. So as you can see in the first > couple pics I am flatting it to be able to glue another new piece to it. Once > flattened > I glued a new base to it, and then clamped it up again and with a spiral bit > proceeded to round it and get it centered and trued again. I had to take very > light passes at first. Once it was rounded it did not grab any longer. > I really like the LongWorth addition to my Rotary table and it works well if > I make sure it's very snug. I did have a bit of trouble with it grabbing a > couple times but the rounder it got the better it worked, as I mentioned > earlier. Not a perfect way to do things but sure is another good clamping > method. > I am open to questions and comments. > > Kind Regards, > > Timothy J. Ziegler > Ziegler WoodWork & Specialty > Ziegler Laser Worx LLC > 14171 160th Ave. > Foreston MN 56330 > > 320-294-5798 shop > 320-630-2243 cell > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEr51rGA1mJUUepCH9gduX8TRY3KeGvASVQosiN5LE%3DbQ%40mail.gmail.com.
-- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAM7C%3D9BzUBsDjwdLkTO-GzTK_HGyKvse3sg7NVE%3D5wsPUd1rKw%40mail.gmail.com.
