Hello Everyone.
Another 2 day work shift for me. Dan I know with pulley's the size will effect
the rotation. Im not so sure its the same with gears? I do know that Iam
planning to work with a machine that behaves very much like a spirograph.But
first things first, the oval before a pretty patterns. ;-)But Please if you
think you can make something like what you are thinking aboutPlease do so. the
concept is entreating to me.As a side Note: I find it funny that Men back in
the 1700's and 1800's could make machines that today most people can not
phantom how they did what they did?
Just a few more days and I will have to time to "Play" Again . ;-)
Have a good night.
C.A.G.
On Tuesday, January 16, 2024 at 09:19:53 AM EST, cdkr...@gmail.com
<cdkra...@gmail.com> wrote:
What I'm curious about by mentioning different number of teeth on planetary
and sun gears is the modularity of the rotations. If they havethe same number,
after one rotation the second rotation will travel
the same path. If the number of teeth are different by as little as one,
methinks the path of the second rotation will be different than the first,the
third different than the second etc. until the number of rotations isa multiple
of the two gear tooth numbers. Think Spirograph. ???
Yes, it's nice to work in a shop where the greatest threat is my own
stupidity followed by recluse spiders.
DanK
On Tuesday, January 16, 2024 at 6:51:22 AM UTC-5 Tim Ziegler wrote:
Yeah pretty scary having to worry about that.
Kind Regards,
Timothy J. ZieglerZiegler WoodWork & SpecialtyZiegler Laser Worx LLC14171 160th
Ave.Foreston MN 56330
320-294-5798 shop320-630-2243 cell
On Mon, Jan 15, 2024 at 10:26 PM <bulk...@mmnet.com.au> wrote:
And we thought the danger in our shops were the machines lol
Bill
From: 'Curt George' via Legacy Ornamental Mills
<legacy-orna...@googlegroups.com>
Sent: Tuesday, January 16, 2024 2:37 PM
To: legacy-orna...@googlegroups.com
Subject: Re: Oval jig testing
Hey Guys.
No poisonous snakes or bugs any where around here Bill. ;-)
But on the flip side, the Cold can kill you as fast as any snake can.
the quote stating that , Discretion is the better part of valor is very true.
I too want this jig done and ready to show everyone. But I have to wait,
perhaps next weekend?
I can only Hope and Pray. ;-)
C.A.G.
On Monday, January 15, 2024 at 10:05:55 PM EST, Tim Ziegler
<timjz...@gmail.com> wrote:
I can't take the suspense. lol
Kind Regards,
Timothy J. Ziegler
Ziegler WoodWork & Specialty
Ziegler Laser Worx LLC
14171 160th Ave.
Foreston MN 56330
320-294-5798 shop
320-630-2243 cell
On Mon, Jan 15, 2024 at 6:17 PM 'Curt George' via Legacy Ornamental Mills
<legacy-orna...@googlegroups.com> wrote:
Most likely next weekend???
We will see.
C.A.G.
On Monday, January 15, 2024 at 07:14:45 PM EST, <bulk...@mmnet.com.au> wrote:
Very nice curt a video showing it working will show all exactly what your
explaining
Bill
From: 'Curt George' via Legacy Ornamental Mills
<legacy-orna...@googlegroups.com>
Sent: Tuesday, January 16, 2024 7:16 AM
To: 'Curt George' via Legacy Ornamental Mills <legacy-orna...@googlegroups.com>
Subject: Re: Oval jig testing
Woops.
part of this message did not show up...
Here is the hole message. (second try!)
Hello Everyone.
It's -5 outside today. (Thanks Tim, for sending Bill some cold air, it hit my
area in its way to Auz. ) ;-p
Since my shop is un-heated, (I use a propane heater to heat the shop when I'm
working, But today
its just to cold to go out there and try to heat the shop.)
This is a reply that I gave to a private e-mail Explaining what I was doing/
how this jig works.
I think everyone will enjoy this info.
The Planetary gear system is the concept that I am using to make this jig work.
The "Sun" Gear is pinned to the tables supports, (It dose not move with the
table.)
The Planet gear is fixed to the table. so it moves around the sun gear when the
table turns.
the planet gear has a fixed pin on it. so as it moves the arm moves the table.
thus making an
oval as the table turns. I am using my Legacy/overhead router for the cutting.
(at this time.)
I Hope the photo's help explain what is happening here?
photo 1 shows the "Sun" gear lifted up, a post, is running through the ball
bearing center. (its pined under the table, to keep it form moving .)
photo 2 shows the linkage. (as the table moves the planate gear rotates moving
the pin, making the table move back and forth as the planate turns around the
sun gear.)
Photo3 shows the planate gear/pin and table with linear rails.
Photo's 4&5 show the over all set-up on my Legacy (Ornamental Mill.)
C.A.G.
On Monday, January 15, 2024 at 03:02:54 PM EST, 'Curt George' via Legacy
Ornamental Mills <legacy-orna...@googlegroups.com> wrote:
Hello Everyone.
It's -5 outside today. (thanks Tim, for sending Bill some cold air, it hit my
area in its way to Auz. ) ;-p
Since my shop is un-heated, (I use a propane heater to heat the shop when I'm
working, But today
its just to cold to go out there and try to heat the shop.)
This is a reply that I gave to a private e-mail Explaining what I was doing/
how this jig works.
I think everyone will enjoy this info.
The Planetary gear system is the concept that I am using to make this jig work.
The "Sun" Gear is pinned to the tables supports, (It dose not move with the
table.)
The Planet gear is fixed to the table. so it moves around the sun gear when the
table turns.
the planet gear has a fixed pin on it. so as it moves the arm moves the table.
thus making an
oval as the table turns. I am using my Legacy/overhead router for the cutting.
(at this time.)
I Hope the photo's help explain what is happening here?
photo 1 shows the sun gear lifted up running through the ball bearing center.
(its pinning under the table.)
photo 2 shows the linkage.
Photo3 shows the planate gear/pin and table with linear rails.
Photo's 4&5 show the over all set-up on my Legacy (Ornamental Mill.)
C.A.G.
On Sunday, January 14, 2024 at 09:29:28 PM EST, Curt George
<curt....@yahoo.com> wrote:
Hello Frank.
The planetary gear has a is fixed pin at this min. But I will be able to make
it adjustable latter.
At this time there is a 2" off-set.
The table is disposable, there are only 4 screw holding it down onto the slides.
I am using linear slides for the table. (in two photo's I used drawer slide
they worked but they got in the way of my Legacy side rails. so I replaced
them.)
If all goes well, I will be making an oval picture frame, and latter some small
bowls.
talk to you and everyone more latter.
C.A.G.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/735714525.996038.1705348903408%40mail.yahoo.com
.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/1448721690.1003398.1705349747143%40mail.yahoo.com.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/003c01da4810%24ff3263e0%24fd972ba0%24%40mmnet.com.au.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/3003881.1056652.1705364266233%40mail.yahoo.com.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFTjE2O1j5JjMB4bHMq%3Dobr-tN%2BcvXBDVnFVKEqmuyxOw%40mail.gmail.com.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/1745586356.1084439.1705376212686%40mail.yahoo.com.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/002c01da4834%243832bf00%24a8983d00%24%40mmnet.com.au.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/5b55439d-6994-4bb8-82ee-403a69ee5871n%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/152357607.1677505.1705555995011%40mail.yahoo.com.
