Tom, Here you are hitting the difference between "lumpers" and "splitters". As 
I said, I am a lumper and use a very general Master eg. Obituaries with 
virtually nothing in all the other boxes. For each relevant Event I then add 
the details of the obituary in the Source Detail. Thus, if I had found the name 
of Edward Hayes in an Obituary then against his Name "Event" would be the 
Master Source "Obituary" and the Source Detail would carry the details "St 
Helens Journal 5 Oct. 1944 from St Helens Public Library". Splitters may well 
have separate Obituary Master Sources for each publication. There are numerous 
ways of doing this and ultimately the choice is yours. I do mix the methods up 
a bit when it makes life easier! WRT your last paragraph, as I mentioned in my 
last email just attach your Obituary Source (which ever way you have choosen) 
as the source for the particular individual comcerned. If the connection needs 
clarification then this can be inclded in the nates to the Source Detail. Ron 
Ferguson _____________________________________________________________________ 
For Genealogy, Software and Social visit: http://www.fergys.co.uk *Over 650 
Surnames from 11 Countries* View the Grimshaw Family Tree at: 
http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: 
http://myweb.tiscali.co.uk/fergys/ 
_____________________________________________________________________> From: 
[EMAIL PROTECTED]> To: [email protected]> Subject: Re: 
[LegacyUG] A Question About Sourcing> Date: Fri, 19 Oct 2007 08:56:11 -0400>> 
Thanks Nancy and Ron.>> With both your solutions, am I correct in assuming that 
the Master Source> would not identify the deceased or any other person who 
record uses that> source? Also, as most of my families have been local for 
centuries, there> have been hundreds of obituaries in the local newspaper over 
the years.> Wouldn't it get rather cluttered if the date and page number of 
each of> hundreds of obituaries were listed in the source detail?>> I do place 
the entire text of each obituary in the general notes section of> the deceased, 
making sure that I also include the date of publication as> well as the name of 
the newspaper.>> My main concern is how to handle the situation where my source 
for a piece> of information about an individual other than the deceased comes 
from an> obituary.>> Thanks,>> Tom Herson> Ithaca, NY> AIM HersonIthaca> ----- 
Original Message -----> From: "ronald ferguson"> To:> Sent: Friday, October 19, 
2007 8:33 AM> Subject: RE: [LegacyUG] A Question About Sourcing>>>> Tom,>> RE: 
your first question - that is nearly what I do. I have a Master Source> for 
*all* Obituaries and I put the name of the newspaper in the Details (but> I am 
a lumper!). There is nothing wrong with doing it the way you suggest.>> I have 
often found names (rather than residences) from Obituaries and as you> imply I 
use the Obituary Master Source as the source for the name. Similarly> if you 
use the Residence Event for the addresses then the Obituary Master> Source can 
be used as the source for this Event.>> Ron Ferguson> 
_____________________________________________________________________>> For 
Genealogy, Software and Social visit:> http://www.fergys.co.uk> *Over 650 
Surnames from 11 Countries*> View the Grimshaw Family Tree at:> 
http://www.fergys.co.uk/Grimshaw/> For The Fergusons of N.W. England See:> 
http://myweb.tiscali.co.uk/fergys/> 
_____________________________________________________________________>> 
________________________________> From: [EMAIL PROTECTED]> To: 
[email protected]> Subject: [LegacyUG] A Question About 
Sourcing> Date: Fri, 19 Oct 2007 07:54:24 -0400>> I'm assuming that it's not 
necessary to create a separate source for each> obituary as I did when I was 
using Family Tree Maker. Would an appropriate> Master Source title be: Obituary 
in ?>> When using the prior program I would often cite someone else's obituary 
as> the source for a piece of information, such as the current residence of a> 
child or other relative of the deceased. What would be an appropriate method> 
of doing this when using Legacy?>> Thank you,>> Tom Herson> Ithaca, NY> AIM 
HersonIthaca>> 
_________________________________________________________________
Get free emoticon packs and customisation from Windows Live. 
http://www.pimpmylive.co.uk


Legacy User Group guidelines:
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
   http://www.mail-archive.com/[email protected]/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp


Reply via email to