I have successfully run Legacy from a U3 Sandisk Cruiser 4GB flash drive. The U3 software MUST be installed on a computer so that you can access your flash drive.
On your flash drive, create a folder named Legacy. Copy all of your Legacy files (data, pictures, sounds, video, et cetera) from your computer to the newly-created Legacy folder on the flash drive. From within the Legacy program, you can browse to the location of your database on the flash drive to open it. (Note that Legacy MUST be installed on the computer you are using with your flash drive. You can copy the Legacy setup file to your flash drive so that you can install Legacy on other computers.) When I get home, I then use other 3-party software to sync the Legacy database on the flash drive with the primary Legacy database on my computer. That way both databases are current. Mark ====================================================== -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Garnet Quigley Sent: Tuesday, May 13, 2008 8:20 PM To: [email protected] Subject: [LegacyUG] Legacy 6.0 and a USB Flash Drive Does anyone know if it possible to operate Legacy 6.0 from a USB Flash Drive which does have the space (4gb) to accommodate the programme and my current data files? <snip> Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/[email protected]/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
