Glen, Please re-read my original email.
"Note that Legacy MUST be installed on the computer you are using with your flash drive." Mark, This exact situation comes up on this list from time to time. You cannot copy the Legacy folder and expect it to run on a computer that has not had Legacy installed on it. There are files that are installed to folders other than the Legacy folder. Please try running Legacy from your Flash drive on a computer that has never had Legacy installed and see if that works. Please report back to the list. I would be interested in your findings. Glen Ballard ________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] <[EMAIL PROTECTED]>] On Behalf Of Mark Wilson Sent: Wednesday, May 14, 2008 2:05 PM To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] Legacy 6.0 and a USB Flash Drive I have successfully run Legacy from a U3 Sandisk Cruiser 4GB flash drive. The U3 software MUST be installed on a computer so that you can access your flash drive. On your flash drive, create a folder named Legacy. Copy all of your Legacy files (data, pictures, sounds, video, et cetera) from your computer to the newly-created Legacy folder on the flash drive. From within the Legacy program, you can browse to the location of your database on the flash drive to open it. (Note that Legacy MUST be installed on the computer you are using with your flash drive. You can copy the Legacy setup file to your flash drive so that you can install Legacy on other computers.) When I get home, I then use other 3-party software to sync the Legacy database on the flash drive with the primary Legacy database on my computer. That way both databases are current. Mark Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp