Date: Tue, 26 Jun 2001 09:29:46 -0400
From: "Pres Waterman" <[EMAIL PROTECTED]>
Subject: Re: in car power supply
>
> Has anyone ever found a source for the connector that plugs on to the
bottom of
> the Libretto (the part inside the replicator).
>
> I assume that Toshiba didnt make it in house and that somewhere there must
be
> another bit of equipment that uses the same plug and socket arrangement.
> I'd loe to get my hands on a couple of them to make really cut down
parallel and
> serial ports, without having to kill a replicator first.
There are parts inside the replicator... it's not just a physical
thing...<G>
If you can't deal with the size of the mini-replicator bar ( and I never
take mine off, it's just part of the unit to me ) then a PCMCIA solution
seems best. Although most Librettos ( you didn't mention which ) have only 1
slot, so you may have to pick which port you need at the moment.
The L1x0 has a dual slot.
Thanks
Pres Waterman W2PW
c/o Patchogue Motors, Inc.
Long Island Ford and Kia dealer
GO BILLS!
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
-------UNSUBSCRIBE-------
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
--------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...
**************************************************************