Date: Sat, 23 Dec 2006 20:46:54 +0100 From: "Avi Cohen Stuart" <[EMAIL PROTECTED]> Subject: RE: [LIB] Margi DVD-to-Go card works!
> >From: "Michael Heathcote" <[EMAIL PROTECTED]> > > > >Note using W95 I used the MCI v2.18 successfully. > >Now using W98SE I have tried MCI v2.18 and the driver appears to be > >okay, but have no picture or sound, > > That's what ended up happening to me no matter what I tried. For the sound you need to find the toggle that says "ZV port". If you don't have it then the driver for the Yahama is outdated. The Neomagic driver might also be outdated. Another possibility is that you need a newer version of DirectX. > >the dongle output may work but have not tried. > >I can't get any of the 3 drivers under WDM v1.05 to work at all, I get > >the message "NTKERN.VXD device loader for this device could not load > >the device driver" > > > >So for W98SE, should I be using the MCI or WDM driver/software set? > >Does anyone have a set of drivers later than the set I have tried? > >Any other tips, I am all ears! ...I don't want to go back to W95! > I tried and tried setting up the Margi card both in W98SE and > W2K before I fially gave up. I never got it to output either > sound or video. But from what you've written, I'm now > tempted to install a copy of W95 to a new partition or drive, > and see if it'll work there. > However... that means taking some time to drive over to where > it's stashed in storage and digging around for the beast. It > would be great if I could get the card to play MPEG-2 encoded > files from the HDD. Too bad the L110 lacks the power to > process DivX and XVid encoded vids. Check also the DirectX version installed. You need at least 7 or 8 if I'm not mistaken. Avi.
