On Tue, 2010-10-12 at 11:17 +0100, Dave Martin wrote: > Sincle I believe this is a known issue with the hardware, it could be > wise to streamline the putting of bootloader and filesystem on > separate devices. > > Manually at least, this wasn't too hard: I ran linaro-media-create, > copied the boot images onto a separate SD card to install them, then > booted with the real card in a card reader attached via USB -- this > works much better+faster than straight booting from the on-board MMC > slot, and has the advantage that SDHC cards (or USB stick / HDD etc.) > can be used. Especially if we configure the root device into the > bootloader as root=UUID=<uuid>, Linux should be able to find the root > fs wherever it is. > > Is this feasible?
This is what is being worked on ATM. Scott -- Scott Bambrough <scott.bambro...@linaro.org> Linaro Infrastructure Team Lead _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev