On Tue, 2010-11-09 at 08:52 +0000, Jamie Bennett wrote:
> Hi,
>
> We are just one day away from the Linaro 10.11 release and with a bit of
> luck, a strong down-wind and lots of testing from the community we can
> release on time and in good shape. If you have the required hardware
> available *please* test the final image candidates which can be found as
> follows:
>
> Headless (console only) image:
> http://snapshots.linaro.org/10.11-daily/linaro-headless/20101108/2
>
> Please select the 20101109 hwpack for your board at:
>
> http://snapshots.linaro.org/10.11-daily/linaro-hwpacks/
>
> To install the image please see:
>
> http://wiki.linaro.org/Releases/DailyBuilds
So I know its not on the testing list, but the qemu instructions on the
wiki page fail, as they don't include an omap3 hwpack.
Further, after providing an omap3 hwpack to build the image, the
resulting image seems to have partition table issues when booted with
qemu:
[ 24.961090] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
fsck from util-linux-ng 2.17.2
rootfs: The filesystem size (according to the superblock) is 1030168 blocks
The physical size of the device is 1030118 blocks
Either the superblock or the partition table is likely to be corrupt!
rootfs: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
(i.e., without -a or -p options)
mountall: fsck / [224] terminated with status 4
mountall: Filesystem has errors: /
Errors were found while checking the disk drive for /
Press F to attempt to fix the errors, I to ignore, S to skip mounting or M for
manual recovery
I'll file a bug here shortly if this hasn't already been seen.
But in the meantime, before tomorrow it seems we may want to remove the
qemu instructions for this release.
thanks
-john
_______________________________________________
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev
