On Tue, Jun 07, 2011 at 10:01:48AM +0100, Andy Green wrote: > On 06/07/2011 09:35 AM, Somebody in the thread at some point said: > > >>>Disabling Thumb2 fixes the problem. > >> > >>What did you actually disable? Presumably not CONFIG_THUMB2_KERNEL so > >>the thumb support at all? > > > >I deselected CONFIG_THUMB2_KERNEL using menuconfig, which changed > >the .config file like... > > > >-CONFIG_THUMB2_KERNEL=y > > Yeah but where did this config come from? Regenerating > omap2plus_defconfig as I showed doesn't allow CONFIG_THUMB2_KERNEL > to be configured because CONFIG_CPU_V6 is set (along with V7) since > omap2plus_defconfig has a bunch of different cores supported.
Yes, starting from omap2plus_defconfig, you have to turn off the omap2 support in order for it to be possible to enable CONFIG_THUMB2_KERNEL. We should probably document this-- I'll take a look at the wiki page. Cheers ---Dave > > You mentioned --> > > "The .config I'm using is that described on the wiki at > https://wiki.linaro.org/Resources/HowTo/KernelDeploy#From_Linaro_sources" > > it also recommends > > make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- omap2plus_defconfig > > I just confirmed that's the case with current linux-linaro-2.6.39. > Am I going nuts :?) > > -Andy _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev